BADU Resort Schwimmbad Umwälzpumpen
Die Schwimmbadpumpe BADU Resort deckt Anwendungsbereiche ab, die sonst nur von schweren teuren Bronze- oder Guss-Pumpen erreicht werden. Wellnessoasen mit großem Becken oder Attraktionen wie Schwallduschen und Wasserfälle, Hotelschwimmbäder oder außergewöhnliche Privatschwimmbäder sind ihr Spezialgebiet. Dank der Ausführung in hochwertigem glasfaserverstärktem Kunststoff reduzieren sich die Investitionskosten, nicht aber Leistungsfähigkeit oder Langlebigkeit!
Benutzung der Pumpen für Schwimmbecken und deren Schutzbereich ist nur zulässig, wenn diese nach DIN/VDE 0100 Teil 702 errichtet sind. Bitte fragen Sie Ihren Elektrofachmann!
Der elektrische Anschluss sollte grundsätzlich durch eine Elektrofachkraft erfolgen.
Technische Änderungen vorbehalten. Abbildungen ähnlich.
Quelle hochauflösendes Produktfoto: SPECK Pumpen
Self-priming filtration circulation pump BADU Resort 110 for pool sizes of approximately 400-500 m³. 3~ Y/Δ 690/400 V H max. = 22 m Q max. = 125 m³/h techQ: 110 m³/h techH: 10 m WS Pool size: 400 - 500 m³ Power output: 5.50 kW Inlet / outlet connection d(mm): 110/110 The BADU Resort covers fields of application which would otherwise be served by expensive, heavy duty bronze and cast-iron pumps. The BADU Resort's areas of expertise are wellness spas with large pools or attractions such as splash showers and waterfalls, hotel swimming pools and extraordinary private swimming pools. Thanks to the high quality reinforced fibreglass plastic version, investment costs are dramatically reduced without affecting the superior performance and durability. Field of application Swimming pool water circulation through a filter system. The pump can be installed max. 3 m above or below water level. Design Monoblock-type pump with integrated strainer tank. The bellow-type mechanical seal is mounted on a plastic shaft protector sleeve. Motor/pump shaft has no contact with the pool water providing complete electrical separation. Pool equipment: Circulation pump Pool size in m³: 400 - 500 Filter size in mm: larger than 1100 Flow rate Q in m³/h: 105 Total head H in m WS: 10 Motor performance in kW (P2): 5.50 Strainer capacity in l: approx. 10 Strainer basket mesh size in mm: approx. 3.4 x 3.2 Pool type: Indoor pool, Outdoor pool, Natural pool/swimming pond Installation: Built-in pool Class: PREMIUM Pump casing: PP GF 30 Diffuser: PP GF 30 Impeller: PPE GF 30 / PP GF 30 Strainer basket: PP Mechanical seal: carbon / ceramic / NBR Screws: stainless steel Intermediate housing: PP TV 40 Gland housing: PP TV 40 Glue socket: ABS Impeller nut: PP GF 30 Lid: PC, transparent / PA 66 GF 30 Special motors on request. The above mentioned pumps can be used for pool water with a salt concentration of up to 0.5%, i. e. 5 g/l. For higher salt concentrations please contact us. Also available in AK version
Self-priming filtration circulation pump BADU Resort 30 for pool sizes of approximately 120-150 m³. 3~ Y/Δ 400/230 V H max. = 15,5 m Q max. = 45 m³/h techQ: 30 m³/h techH: 10 m WS Pool size: 120 - 150 m³ Power output: 1.50 kW Inlet / outlet connection d(mm): 75/75 The BADU Resort covers fields of application which would otherwise be served by expensive, heavy duty bronze and cast-iron pumps. The BADU Resort's areas of expertise are wellness spas with large pools or attractions such as splash showers and waterfalls, hotel swimming pools and extraordinary private swimming pools. Thanks to the high quality reinforced fibreglass plastic version, investment costs are dramatically reduced without affecting the superior performance and durability. Field of application Swimming pool water circulation through a filter system. The pump can be installed max. 3 m above or below water level. Design Monoblock-type pump with integrated strainer tank. The bellow-type mechanical seal is mounted on a plastic shaft protector sleeve. Motor/pump shaft has no contact with the pool water providing complete electrical separation. Pool equipment: Circulation pump Pool size in m³: 120 - 150 Filter size in mm: 920 - 1100 Flow rate Q in m³/h: 30 Total head H in m WS: 10 Motor performance in kW (P2): 1.50 Strainer capacity in l: approx. 10 Strainer basket mesh size in mm: approx. 3.4 x 3.2 Pool type: Outdoor pool, Natural pool/swimming pond, Indoor pool Installation: Built-in pool Class: PREMIUM Pump casing: PP GF 30 Diffuser: PP GF 30 Impeller: PPE GF 30 / PP GF 30 Strainer basket: PP Mechanical seal: carbon / ceramic / NBR Screws: stainless steel Intermediate housing: PP TV 40 Gland housing: PP TV 40 Glue socket: ABS Impeller nut: PP GF 30 Lid: PC, transparent / PA 66 GF 30 Special motors on request. The above mentioned pumps can be used for pool water with a salt concentration of up to 0.5%, i. e. 5 g/l. For higher salt concentrations please contact us. Also available in AK version
Self-priming filtration circulation pump BADU Resort 40 for pool sizes of approximately 150-180 m³. 3~ Y/Δ 400/230 V H max. = 18,0 m Q max. = 49 m³/h techQ: 40 m³h techH: 10 m WS Pool size: 150 - 180 m³ Power output: 2.20 kW Inlet / outlet connection d(mm): 90/90 The BADU Resort covers fields of application which would otherwise be served by expensive, heavy duty bronze and cast-iron pumps. The BADU Resort's areas of expertise are wellness spas with large pools or attractions such as splash showers and waterfalls, hotel swimming pools and extraordinary private swimming pools. Thanks to the high quality reinforced fibreglass plastic version, investment costs are dramatically reduced without affecting the superior performance and durability. Field of application Swimming pool water circulation through a filter system. The pump can be installed max. 3 m above or below water level. Design Monoblock-type pump with integrated strainer tank. The bellow-type mechanical seal is mounted on a plastic shaft protector sleeve. Motor/pump shaft has no contact with the pool water providing complete electrical separation. Pool equipment: Circulation pump Pool size in m³: 150 - 180 Filter size in mm: larger than 1100 Flow rate Q in m³/h: 40 Total head H in m WS: 10 Motor performance in kW (P2): 2.20 Strainer capacity in l: approx. 10 Strainer basket mesh size in mm: approx. 3.4 x 3.2 Pool type: Outdoor pool, Natural pool/swimming pond, Indoor pool Installation: Built-in pool Class: PREMIUM Pump casing: PP GF 30 Diffuser: PP GF 30 Impeller: PPE GF 30 / PP GF 30 Strainer basket: PP Mechanical seal: carbon / ceramic / NBR Screws: stainless steel Intermediate housing: PP TV 40 Gland housing: PP TV 40 Glue socket: ABS Impeller nut: PP GF 30 Lid: PC, transparent / PA 66 GF 30 Special motors on request. The above mentioned pumps can be used for pool water with a salt concentration of up to 0.5%, i. e. 5 g/l. For higher salt concentrations please contact us. Also available in AK version
Self-priming filtration circulation pump BADU Resort 45 for pool sizes of approximately 180-210 m³. 3~ Y/Δ 400/230 V H max. = 20,5 m Q max. = 51 m³/h techQ: 45 ³ m3/h techH: 10 m WS Pool size: 180 - 210 m³ Power output: 2.60 kW Inlet / outlet connection d(mm): 90/90 The BADU Resort covers fields of application which would otherwise be served by expensive, heavy duty bronze and cast-iron pumps. The BADU Resort's areas of expertise are wellness spas with large pools or attractions such as splash showers and waterfalls, hotel swimming pools and extraordinary private swimming pools. Thanks to the high quality reinforced fibreglass plastic version, investment costs are dramatically reduced without affecting the superior performance and durability. Field of application Swimming pool water circulation through a filter system. The pump can be installed max. 3 m above or below water level. Design Monoblock-type pump with integrated strainer tank. The bellow-type mechanical seal is mounted on a plastic shaft protector sleeve. Motor/pump shaft has no contact with the pool water providing complete electrical separation. Pool equipment: Circulation pump Pool size in m³: 180 - 210 Filter size in mm: larger than 1100 Flow rate Q in m³/h: 45 Total head H in m WS: 10 Motor performance in kW (P2): 2.60 Strainer capacity in l: approx. 10 Strainer basket mesh size in mm: approx. 3.4 x 3.2 Pool type: Indoor pool, Natural pool/swimming pond, Outdoor pool Installation: Built-in pool Class: PREMIUM Pump casing: PP GF 30 Diffuser: PP GF 30 Impeller: PPE GF 30 / PP GF 30 Strainer basket: PP Mechanical seal: carbon / ceramic / NBR Screws: stainless steel Intermediate housing: PP TV 40 Gland housing: PP TV 40 Glue socket: ABS Impeller nut: PP GF 30 Lid: PC, transparent / PA 66 GF 30 Special motors on request. The above mentioned pumps can be used for pool water with a salt concentration of up to 0.5%, i. e. 5 g/l. For higher salt concentrations please contact us. Also available in AK version
Self-priming filtration circulation pump BADU Resort 50 for pool sizes of approximately 210-240 m³. 3~ Y/Δ 400/230 V H max. = 22,5 m Q max. = 54 m³/h techQ: 50 m³/h techH: 10 m WS Pool size: 210 - 240 m³ Power output: 3.00 kW Inlet / outlet connection d(mm): 110/110 The BADU Resort covers fields of application which would otherwise be served by expensive, heavy duty bronze and cast-iron pumps. The BADU Resort's areas of expertise are wellness spas with large pools or attractions such as splash showers and waterfalls, hotel swimming pools and extraordinary private swimming pools. Thanks to the high quality reinforced fibreglass plastic version, investment costs are dramatically reduced without affecting the superior performance and durability. Field of application Swimming pool water circulation through a filter system. The pump can be installed max. 3 m above or below water level. Design Monoblock-type pump with integrated strainer tank. The bellow-type mechanical seal is mounted on a plastic shaft protector sleeve. Motor/pump shaft has no contact with the pool water providing complete electrical separation. Pool equipment: Circulation pump Pool size in m³: 210 - 240 Filter size in mm: larger than 1100 Flow rate Q in m³/h: 50 Total head H in m WS: 10 Motor performance in kW (P2): 3.00 Strainer capacity in l: approx. 10 Strainer basket mesh size in mm: approx. 3.4 x 3.2 Pool type: Indoor pool, Natural pool/swimming pond, Outdoor pool Installation: Built-in pool Class: PREMIUM Pump casing: PP GF 30 Diffuser: PP GF 30 Impeller: PPE GF 30 / PP GF 30 Strainer basket: PP Mechanical seal: carbon / ceramic / NBR Screws: stainless steel Intermediate housing: PP TV 40 Gland housing: PP TV 40 Glue socket: ABS Impeller nut: PP GF 30 Lid: PC, transparent / PA 66 GF 30 Special motors on request. The above mentioned pumps can be used for pool water with a salt concentration of up to 0.5%, i. e. 5 g/l. For higher salt concentrations please contact us. Also available in AK version
Self-priming filtration circulation pump BADU Resort 55 for pool sizes of approximately 210-240 m³. 3~ Y/Δ 690/400 V H max. = 24,5 m Q max. = 56 m³/h techQ: 55 m³/h techH: 10 m WS Pool size: 210 - 240 m³ Power output: 4.00 kW Inlet / outlet connection d(mm): 110/110 The BADU Resort covers fields of application which would otherwise be served by expensive, heavy duty bronze and cast-iron pumps. The BADU Resort's areas of expertise are wellness spas with large pools or attractions such as splash showers and waterfalls, hotel swimming pools and extraordinary private swimming pools. Thanks to the high quality reinforced fibreglass plastic version, investment costs are dramatically reduced without affecting the superior performance and durability. Field of application Swimming pool water circulation through a filter system. The pump can be installed max. 3 m above or below water level. Design Monoblock-type pump with integrated strainer tank. The bellow-type mechanical seal is mounted on a plastic shaft protector sleeve. Motor/pump shaft has no contact with the pool water providing complete electrical separation. Pool equipment: Circulation pump Pool size in m³: 210 - 240 Filter size in mm: larger than 1100 Flow rate Q in m³/h: 55 Total head H in m WS: 10 Motor performance in kW (P2): 4.00 Strainer capacity in l: approx. 10 Strainer basket mesh size in mm: approx. 3.4 x 3.2 Pool type: Indoor pool, Natural pool/swimming pond, Outdoor pool Installation: Built-in pool Class: PREMIUM Pump casing: PP GF 30 Diffuser: PP GF 30 Impeller: PPE GF 30 / PP GF 30 Strainer basket: PP Mechanical seal: carbon / ceramic / NBR Screws: stainless steel Intermediate housing: PP TV 40 Gland housing: PP TV 40 Glue socket: ABS Impeller nut: PP GF 30 Lid: PC, transparent / PA 66 GF 30 Special motors on request. The above mentioned pumps can be used for pool water with a salt concentration of up to 0.5%, i. e. 5 g/l. For higher salt concentrations please contact us. Also available in AK version
Self-priming filtration circulation pump BADU Resort 60 for pool sizes of approximately 270-300 m³. 3~ Y/Δ 400/230 V H max. = 14 m Q max. = 80 m³/h techQ: 60 m³/h techH: 10 m WS Pool size: 270 - 300 m³ Power output: 2.60 kW Inlet / outlet connection d(mm): 110/110 The BADU Resort covers fields of application which would otherwise be served by expensive, heavy duty bronze and cast-iron pumps. The BADU Resort's areas of expertise are wellness spas with large pools or attractions such as splash showers and waterfalls, hotel swimming pools and extraordinary private swimming pools. Thanks to the high quality reinforced fibreglass plastic version, investment costs are dramatically reduced without affecting the superior performance and durability. Field of application Swimming pool water circulation through a filter system. The pump can be installed max. 3 m above or below water level. Design Monoblock-type pump with integrated strainer tank. The bellow-type mechanical seal is mounted on a plastic shaft protector sleeve. Motor/pump shaft has no contact with the pool water providing complete electrical separation. Pool size in m³: 270 - 300 Filter size in mm: larger than 1100 Flow rate Q in m³/h: 60 Total head H in m WS: 10 Motor performance in kW (P2): 2.60 Strainer capacity in l: approx. 10 Strainer basket mesh size in mm: approx. 3.4 x 3.2 Class: PREMIUM Pump casing: PP GF 30 Diffuser: PP GF 30 Impeller: PPE GF 30 / PP GF 30 Strainer basket: PP Mechanical seal: carbon / ceramic / NBR Screws: stainless steel Intermediate housing: PP TV 40 Gland housing: PP TV 40 Glue socket: ABS Impeller nut: PP GF 30 Lid: PC, transparent / PA 66 GF 30 Special motors on request. The above mentioned pumps can be used for pool water with a salt concentration of up to 0.5%, i. e. 5 g/l. For higher salt concentrations please contact us. Also available in AK version
Self-priming filtration circulation pump BADU Resort 70 for pool sizes of approximately 300-350 m³. 3~ Y/Δ 400/230 V H max. = 16 m Q max. = 85 m³/h techQ: 70 m³/h techH: 10 m WS Poolgröße: 300 - 350 m³ Motorleistung: 3.00 kW Saug/Druck d(mm): 110/110 The BADU Resort covers fields of application which would otherwise be served by expensive, heavy duty bronze and cast-iron pumps. The BADU Resort's areas of expertise are wellness spas with large pools or attractions such as splash showers and waterfalls, hotel swimming pools and extraordinary private swimming pools. Thanks to the high quality reinforced fibreglass plastic version, investment costs are dramatically reduced without affecting the superior performance and durability. Field of application Swimming pool water circulation through a filter system. The pump can be installed max. 3 m above or below water level. Design Monoblock-type pump with integrated strainer tank. The bellow-type mechanical seal is mounted on a plastic shaft protector sleeve. Motor/pump shaft has no contact with the pool water providing complete electrical separation. Pool equipment: Circulation pump Pool size in m³: 300 - 350 Filter size in mm: larger than 1100 Flow rate Q in m³/h: 70 Total head H in m WS: 10 Motor performance in kW (P2): 3.00 Strainer capacity in l: approx. 10 Strainer basket mesh size in mm: approx. 3.4 x 3.2 Pool type: Outdoor pool, Indoor pool, Natural pool/swimming pond Installation: Built-in pool Class: PREMIUM Pump casing: PP GF 30 Diffuser: PP GF 30 Impeller: PPE GF 30 / PP GF 30 Strainer basket: PP Mechanical seal: carbon / ceramic / NBR Screws: stainless steel Intermediate housing: PP TV 40 Gland housing: PP TV 40 Glue socket: ABS Impeller nut: PP GF 30 Lid: PC, transparent / PA 66 GF 30 Special motors on request. The above mentioned pumps can be used for pool water with a salt concentration of up to 0.5%, i. e. 5 g/l. For higher salt concentrations please contact us. Also available in AK version
Self-priming filtration circulation pump BADU Resort 80 for pool sizes of approximately 350-400 m³. 3~ Y/Δ 690/400 V H max. = 18 m Q max. = 95 m³/h techQ: 80 m³/h techH: 10 m WS Pool size: 350 - 400 m³ Power output: 4.00 kW Inlet / outlet connection d(mm): 110/110 The BADU Resort covers fields of application which would otherwise be served by expensive, heavy duty bronze and cast-iron pumps. The BADU Resort's areas of expertise are wellness spas with large pools or attractions such as splash showers and waterfalls, hotel swimming pools and extraordinary private swimming pools. Thanks to the high quality reinforced fibreglass plastic version, investment costs are dramatically reduced without affecting the superior performance and durability. Field of application Swimming pool water circulation through a filter system. The pump can be installed max. 3 m above or below water level. Design Monoblock-type pump with integrated strainer tank. The bellow-type mechanical seal is mounted on a plastic shaft protector sleeve. Motor/pump shaft has no contact with the pool water providing complete electrical separation. Pool equipment: Circulation pump Pool size in m³: 350 - 400 Filter size in mm: larger than 1100 Flow rate Q in m³/h: 103 Total head H in m WS: 10 Motor performance in kW (P2): 4.00 Strainer capacity in l: approx. 10 Strainer basket mesh size in mm: approx. 3.4 x 3.2 Pool type: Indoor pool, Natural pool/swimming pond, Outdoor pool Installation: Built-in pool Class: PREMIUM Pump casing: PP GF 30 Diffuser: PP GF 30 Impeller: PPE GF 30 / PP GF 30 Strainer basket: PP Mechanical seal: carbon / ceramic / NBR Screws: stainless steel Intermediate housing: PP TV 40 Gland housing: PP TV 40 Glue socket: ABS Impeller nut: PP GF 30 Lid: PC, transparent / PA 66 GF 30 Special motors on request. The above mentioned pumps can be used for pool water with a salt concentration of up to 0.5%, i. e. 5 g/l. For higher salt concentrations please contact us. Also available in AK version