BADU Resort 50, 400 V

Self-priming filtration circulation pump BADU Resort 60-AK-SSV, Dr., lantern version, three-phase current version, for use with diverse salt water and problem medium 3~ Y/Δ 400/230 Volt Mechanical seal SIC/SIC + VITON H max. = 14 m Q max. = 80 m³/h techQ: 60 m³/h techH: 10 m WS power output: 2.60 kW Inlet / outlet connection(d): 110mm/110mm Description The plastic centrifugal pumps BADU Resort-AK are designed for circulation of pool water with a higher salt or brine concentration in combination with a corresponding filtration unit. These pumps meet the highest demands by means of best quality and workmanship. Constructional features Corrosion-resistant – due to high-grade, glass fiber reinforced plastic Inured – against pollution by means of an integrated strainer tank Self-priming – trouble-free filter operation and connection of pool floor cleaners Field of application Thermal water, thermal brine, seawater aquarium with artificially processed salt water, pickle units and several problem media after testing of components and concentration. Generally, the exact medium should be specified during the placement of the order, so that suitability and resistance of the pumps may be verified. Design The special version AK pumps correspond to the standard versions in the BADU programme, however they are designed for use in diverse salt water and problem medias. Media that could potentially leak or minerals and salts which could crystallise do not come into contact with the motor or bearings. Therefore this ensures considerably longer operating times for these fields of application compared to the standard version. The pump can be installed max. 3 m above or below water level.     (illust. similar)

Self-priming filtration circulation pump BADU Resort 70-AK-SSV, Dr., lantern version, three-phase current version, for use with diverse salt water and problem medium 3~ Y/Δ 400/230 Volt Mechanical seal SIC/SIC + VITON H max. = 16 m Q max. = 85 m³/h techQ: 70 m³/h techH: 10 m WS power output: 3.00 kW Inlet / outlet connection(d): 110mm/110mm Description The plastic centrifugal pumps BADU Resort-AK are designed for circulation of pool water with a higher salt or brine concentration in combination with a corresponding filtration unit. These pumps meet the highest demands by means of best quality and workmanship. Constructional features Corrosion-resistant – due to high-grade, glass fiber reinforced plastic Inured – against pollution by means of an integrated strainer tank Self-priming – trouble-free filter operation and connection of pool floor cleaners Field of application Thermal water, thermal brine, seawater aquarium with artificially processed salt water, pickle units and several problem media after testing of components and concentration. Generally, the exact medium should be specified during the placement of the order, so that suitability and resistance of the pumps may be verified. Design The special version AK pumps correspond to the standard versions in the BADU programme, however they are designed for use in diverse salt water and problem medias. Media that could potentially leak or minerals and salts which could crystallise do not come into contact with the motor or bearings. Therefore this ensures considerably longer operating times for these fields of application compared to the standard version. The pump can be installed max. 3 m above or below water level.   (illust. similar)

Self-priming filtration circulation pump BADU Resort 70 for pool sizes of approximately 300-350 m³. 3~ Y/Δ 400/230 V H max. = 16 m Q max. = 85 m³/h techQ: 70 m³/h techH: 10 m WS Poolgröße: 300 - 350 m³ Motorleistung: 3.00 kW Saug/Druck d(mm): 110/110 The BADU Resort covers fields of application which would otherwise be served by expensive, heavy duty bronze and cast-iron pumps. The BADU Resort's areas of expertise are wellness spas with large pools or attractions such as splash showers and waterfalls, hotel swimming pools and extraordinary private swimming pools. Thanks to the high quality reinforced fibreglass plastic version, investment costs are dramatically reduced without affecting the superior performance and durability. Field of application Swimming pool water circulation through a filter system. The pump can be installed max. 3 m above or below water level. Design Monoblock-type pump with integrated strainer tank. The bellow-type mechanical seal is mounted on a plastic shaft protector sleeve. Motor/pump shaft has no contact with the pool water providing complete electrical separation.   Pool equipment: Circulation pump Pool size in m³: 300 - 350 Filter size in mm: larger than 1100 Flow rate Q in m³/h: 70 Total head H in m WS: 10 Motor performance in kW (P2): 3.00 Strainer capacity in l: approx. 10 Strainer basket mesh size in mm: approx. 3.4 x 3.2 Pool type: Outdoor pool, Indoor pool, Natural pool/swimming pond Installation: Built-in pool Class: PREMIUM Pump casing: PP GF 30 Diffuser: PP GF 30 Impeller: PPE GF 30 / PP GF 30 Strainer basket: PP Mechanical seal: carbon / ceramic / NBR Screws: stainless steel Intermediate housing: PP TV 40 Gland housing: PP TV 40 Glue socket: ABS Impeller nut: PP GF 30 Lid: PC, transparent / PA 66 GF 30   Special motors on request. The above mentioned pumps can be used for pool water with a salt concentration of up to 0.5%, i. e. 5 g/l. For higher salt concentrations please contact us. Also available in AK version