BADU Top II/8
€399.00
Available in 1 day, delivery time 2-4 days
Product information "BADU Top II/8"
Selbstansaugende Filterumwälzpumpe BADU Top II/8 für Beckenvolumen von ca.30-60m³, ersetzt das Vorgängermodell BADU Top 8 / Bettar 8
1~230 V
Hmax: 14,5 m
Qmax: 11,5 m³/h
techQ: 8 m³/h
techH: 8 m WS
Poolgröße: 30 - 60 m³
Motorleistung: 0.30 kW
Saug/Druck(Rp): 2" / 1 1/2"
Beschreibung:
Die Kunststoffpumpen der Baureihe BADU Top sind zur Umwälzung des Schwimmbadwassers in Kombination mit einer entsprechenden Filteranlage konzipiert. Die medienberührten Kunststoffteile sind überwiegend aus Polypropylen PP hergestellt und haben damit eine hervorragende Korrosionsbeständigkeit gegenüber dem Schwimmbadwasser und den zur Wasserpflege üblichen Wasserbehandlungsmitteln. Im Pumpengehäuse sind keine Inserts enthalten. Damit ist dieses recyclingfähig. Die Motorwelle dient gleichzeitig als Pumpenwelle, auf der das Laufrad befestigt ist. Als Wellendichtung dient eine Balg-Gleitringdichtung, die auf der Laufradnabe aus Kunststoff sitzt. Hierdurch ist eine sichere Trennung zwischen Schwimmbadwasser und Elektromotor gegeben. Durch die Blockbauweise haben die Pumpen einen geringen Platzbedarf. Sie werden durch Wechselstrommotoren angetrieben. Im Pumpengehäuse ist ein Saugsieb (143) integriert, der gröbere Verunreinigungen aus dem Pumpeninneren fernhält.
Einsatzgebiet:
Schwimmbadwasser-Umwälzung in Filteranlagen, aufstellbar oberhalb oder unterhalb des Wasserniveaus jeweils max. 3 m.
Ausführung:
Blockpumpe mit integriertem Fasernfänger.
Balg-Gleitringdichtung auf Kunststoff-Laufradnabe montiert.
Motor- bzw. Pumpenwelle kommt mit dem Schwimmbadwasser nicht in Berührung! Elektrische Trennung.
Fasernfängerinhalt: ca. 3 l
Saugsiebmaschenweite: ca. 3,2 x 2,6 mm
Werkstoffe:
Pumpengehäuse: PP TV 20
Zwischengehäuse: PP TV 40
Dichtungsgehäuse: PP TV 40
Leitschaufeleinsatz: PP TV 40
Laufrad: PA 66 GF 30 / PC
Saugsieb: PP
Deckel: PC, transparent
Gleitringdichtung: Kohle / Keramik / NBR
Schrauben: Stahl, verzinkt
Sondermotoren auf Anfrage.
Die Pumpen können in der abgebildeten Ausführung für Schwimmbeckenwasser bis zu einer Gesamtsalzkonzentration von 0,5% (entsprechend 5 g/l) eingesetzt werden.
Bei höheren Salzkonzentrationen bitten wir Sie, Rücksprache mit uns zu halten.
Auch in AK-Version erhältlich
Login
Accessory Items
Self-priming filtration circulation pump BADU Magna 12, 230 Volt, no cable and plug, alternating current version, as advanced 1:1 replacement of its predecessor model BADU Top 12 / Bettar 12 1~ 230 V Hmax: approx. 15,5 m Qmax: approx. 14,5 m³/h techQ: approx. 12 m³/h techH: approx. 8 m WS Power output P2: 0.45 kW / Power input P1: 0.69 kW Inlet / outlet connection(Rp): 2" / 1 1/2" A reliable classic in the BADU series, this pump is especially designed for medium-size, above ground pools, partially embedded pools and smaller swimming ponds. Thanks to the large pumping capacity, an automatic pool cleaner can also be attached. Field of application Swimming pool water circulation through a filter system. The pump can be installed max. 3 m above or below water level. Design Monoblock-type pump with integrated strainer tank. The bellow-type mechanical seal is mounted on a plastic shaft protector sleeve. Motor/pump shaft has no contact with the pool water providing complete electrical separation. Pool equipment: Circulation pump Flow rate Q in m³/h: approx. 12 Total head H in m WS: approx. 8 Motor performance in kW (P2): 0.45 Strainer capacity in l: approx. 3 Strainer basket mesh size in mm: approx. 3.2 x 2.6 Pool type: Indoor pool, Outdoor pool Installation: Above ground pool, Built-in pool Class: PREMIUM Pump casing: PP TV 20 Diffuser: PP TV 40 Impeller: PA 66 GF 30 / PC Strainer basket: PP Mechanical seal: carbon / ceramic / NBR Screws: Galvanised steel Intermediate housing: PP TV 40 Gland housing: PP TV 40 Special motors on request. The above mentioned pumps can be used for pool water with a salt concentration of up to 0.5%, i. e. 5 g/l. For higher salt concentrations please contact us. Also available in AK version
Self-priming filtration circulation pump BADU Magna 8, 230 Volt, no cable and plug, alternating current version, as advanced 1:1 replacement of its predecessor model BADU Top 8 / Bettar 8 1~ 230 V Hmax: approx. 14,5 m Qmax: approx. 11,5 m³/h techQ: approx. 8 m³/h techH: approx. 8 m WS Power output P2: 0.30 kW / Power input P1: 0.58 Inlet / outlet connection(Rp): 2" / 1 1/2" A reliable classic in the BADU series, this pump is especially designed for medium-size, above ground pools, partially embedded pools and smaller swimming ponds. Thanks to the large pumping capacity, an automatic pool cleaner can also be attached. Field of application Swimming pool water circulation through a filter system. The pump can be installed max. 3 m above or below water level. Design Monoblock-type pump with integrated strainer tank. The bellow-type mechanical seal is mounted on a plastic shaft protector sleeve. Motor/pump shaft has no contact with the pool water providing complete electrical separation. Pool equipment: Circulation pump Flow rate Q in m³/h: approx. 8 Total head H in m WS: approx. 8 Motor performance in kW (P2): 0.30 Strainer capacity in l: approx. 3 Strainer basket mesh size in mm: approx. 3.2 x 2.6 Pool type: Indoor pool, Outdoor pool Installation: Above ground pool, Built-in pool Class: PREMIUM Pump casing: PP TV 20 Diffuser: PP TV 40 Impeller: PA 66 GF 30 / PC Strainer basket: PP Mechanical seal: carbon / ceramic / NBR Screws: Galvanised steel Intermediate housing: PP TV 40 Gland housing: PP TV 40 Special motors on request. The above mentioned pumps can be used for pool water with a salt concentration of up to 0.5%, i. e. 5 g/l. For higher salt concentrations please contact us. Also available in AK version
Self-priming filtration circulation pump BADU Magna 14, 230 Volt, no cable and plug, alternating current version, as advanced 1:1 replacement of its predecessor model BADU Top 14 / Bettar 14 1~ 230 V Hmax: approx. 16,5 m Qmax: approx. 17,5 m³/h techQ: approx.14 m³/h techH: approx. 8 m WS Power output P2: 0.65 kW / Power input P1: 0.97 kW Inlet / outlet connection(Rp): 2" / 1 1/2" A reliable classic in the BADU series, this pump is especially designed for medium-size, above ground pools, partially embedded pools and smaller swimming ponds. Thanks to the large pumping capacity, an automatic pool cleaner can also be attached. Field of application Swimming pool water circulation through a filter system. The pump can be installed max. 3 m above or below water level. Design Monoblock-type pump with integrated strainer tank. The bellow-type mechanical seal is mounted on a plastic shaft protector sleeve. Motor/pump shaft has no contact with the pool water providing complete electrical separation. Pool equipment: Circulation pump Flow rate Q in m³/h: approx. 14 Total head H in m WS: approx. 8 Motor performance in kW (P2): 0.65 Strainer capacity in l: approx. 3 Strainer basket mesh size in mm: approx. 3.2 x 2.6 Pool type: Indoor pool, Outdoor pool Installation: Above ground pool, Built-in pool Class: PREMIUM Pump casing: PP TV 20 Diffuser: PP TV 40 Impeller: PA 66 GF 30 / PC Strainer basket: PP Mechanical seal: carbon / ceramic / NBR Screws: Galvanised steel Intermediate housing: PP TV 40 Gland housing: PP TV 40 Special motors on request. The above mentioned pumps can be used for pool water with a salt concentration of up to 0.5%, i. e. 5 g/l. For higher salt concentrations please contact us. Also available in AK version