BADU 90 Eco Motion

Self-priming filtration circulation pump BADU 90/40 Eco MV-E, BADU Prime 40 Eco MV-E, alternating current version. Replaced by successor BADU Eco Flex 1~230 V H max. = 20,0 m Q max. = 46,0 m³/h techQ = 15 m³/h techH = 6 m Pool size: 150 - 200 m³ Power input P1 (kW): min.=0,11 / max.=2,50 Power output P2 (kW): min.=0,09 / max.=2,20 Rated current = 0,60 - 12,0 A Rotational speed = min. 1035 U/min / max. 3425 U/min Inlet/outlet (d): 90mm/90mm Weight= 28,5 kg Special motors on request. The above mentioned pumps can be used for pool water with a salt concentration of up to 0.5%, i. e. 5 g/l. For higher salt concentrations please contact us. Also available in AK version

Self-priming filtration circulation pump with electronic rotation speed control BADU Eco Soft for pool sizes of approximately 30-90 m³. 1~230 V Hmax: 22 m Qmax: 28 m³/h Pool size: 30 - 90 m³ Motor performance: 0.75 kW Power input P1: 0,06 - 1,10 kW Power output P2: 0,03 - 0,75 kW Rated current: 0,45 - 5,00 A Inlet / outlet connection (d): 63/50   The performance can be set in steps of 1 %. The pump makes full use of the motor at every operating point. Three performance stages, as well as the suction time, can be programmed individually. The optimum setting for the most effective application and highest efficiency is guaranteed in each performance range. The BADU Eco Soft can be controlled potential-free and can be connected to our BADU Eco Logic pump control, BADU Logic 3 filter control, a timer or the building service engineering. Field of application Swimming pool water circulation through a filter system. The pump can be installed max. 3 m above or below water level. Design Monoblock-type pump with integrated strainer tank. The bellow-type mechanical seal is mounted on a plastic shaft protector sleeve. Motor/pump shaft has no contact with the pool water providing complete electrical separation.   Pool equipment: Circulation pump Pool size in m³: 30 - 90 Flow rate Q in m³/h: max. 28 Total head H in m WS: max. 22 Motor performance in kW (P2): max. 0.75 Strainer capacity in l: approx. 3 Strainer basket mesh size in mm: approx. 3.2 x 2.6 Pool type: Outdoor pool, Indoor pool, Natural pool/swimming pond Installation: Built-in pool, Above ground pool Class: PREMIUM, GREEN Pump casing: PP TV 20 Diffuser: PA 6 GF 15 Impeller: PA 66 GF 30 Strainer basket: PP Mechanical seal: carbon / ceramic / NBR Screws: stainless steel, galvanized Intermediate housing: PP TV 40 Gland housing: PP TV 40 Glue socket: ABS Lid: PC, transparent / PA 66 GF 30   The above mentioned pumps can be used for pool water with a salt concentration of up to 0.5%, i. e. 5 g/l. For higher salt concentrations please contact us. Also available in AK version  

Self-priming filtration circulation pump BADU Eco Motion, alternating current version for pool sizes of approximately 30-200 m³, replaces its predecessor model BADU 90 Eco Motion   No longer available, replaced by BADU Eco Flex 1~230 V H max. = 20,0 m Q max. = 43,0 m³/h Power input P1 (kW): max.=2,70 Power output P2 (kW): max.=2,20 Rated current = max. 13,0 A Rotational speed = min. 1000 U/min / max. 2850 U/min Inlet / outlet connection(Rp): 90mm/90mm Weight= 26 kg High comfort, low consumption. Highly efficient package for the major tasks in the premium sector: a converter fitted on to the motor in modular form with a plug-in principle combined with the BADU Prime 40. The user-friendly intuitive operation via touchpad, as well as serial interfaces, hardly allow for any more comfort in a pump! Here you will find our product video. Field of application Swimming pool water circulation through a filter system. The pump can be installed max. 3 m above or below water level. Design Monoblock-type pump with integrated strainer tank. The bellow-type mechanical seal is mounted on a plastic shaft protector sleeve. Motor/pump shaft has no contact with the pool water providing complete electrical separation.   Pool equipment: Circulation pump Pool size in m³: 30 - 200 Filter size in mm: 920 - 1100 Flow rate Q in m³/h: max. 40 Total head H in m WS: max. 20 Motor performance in kW (P2): max. 2.20 Strainer capacity in l: approx. 6 Strainer basket mesh size in mm: approx. 3.0 x 2.8 Pool type: Indoor pool, Natural pool/swimming pond Installation: Built-in pool Class: PREMIUM, GREEN Pump casing: PP GF 30 Diffuser: PP GF 30 Impeller: PPE GF 30 Strainer basket: PP Mechanical seal: carbon / ceramic / NBR Screws: stainless steel Intermediate housing: PP GF 30 Gland housing: PP TV 40 Glue socket: ABS Lid: PC, transparent / PA 66 GF 30   Special motors on request. The above mentioned pumps can be used for pool water with a salt concentration of up to 0.5%, i. e. 5 g/l. For higher salt concentrations please contact us. Also available in AK version   TECHNICHAL DATA manufacturer's page   ANIMATED VIDEO manufacturer's page