BADU 21-81/32R G, 400 V
€1,150.00
Available in 1 day, delivery time 2-4 days
Product information "BADU 21-81/32R G, 400 V"
Normalsaugende Umwälzpumpe BADU 21-81/32R G Dr. in Drehstromausführung mit Klebeverschraubungen d 90 mm an Saug- und Druckstutzen, für Schwimmbad- und Industrie-Filteranlagen, Gegenstrom- Schwimmanlagen, Klimaanlagen, Schwimmbad-Attraktionen, Reinigungsgeräte u.a.m., bis 90 m³/h Förderstrom.
3~ Y/Δ 400/230 Volt
H max. = 11,8 m
Q max. = 73 m³/h
techQ: 40 m³/h
techH: 11 m WS
Poolgröße: 30 - 100 m³
Motorleistung: 2.20 kW
Saug / Druck d (mm): 90/90
| Poolgröße in m³: | 30 - 100 |
| Fördermenge in m³/h: | 40 |
| Förderhöhe in m WS: | 11 |
| Motorleistung in kW (P2): | 2,20 |
| Pumpengehäuse: | PPE GF 30 |
| Gehäusedeckel: | PPE GF 30 |
| Laufrad: | POM GF 30 / PP GF 30 |
| Gleitringdichtung: | Kohle / Keramik / NBR |
| Schrauben: | Stahl, verzinkt |
| Klebemuffe: | ABS |
| Laufradmutter: | PP GF 30 |
| Spaltring: | Edelstahl 1.4301 |
| Motorwelle: | Edelstahl 1.4057 |
Beschreibung:
Die Kunststoffpumpen der Baureihe BADU 21-81/32R G Dr. in Drehstromausführung sind zur Förderung von Flüssigkeiten in Kombination mit weiteren Anlagenteilen konzipiert.
Die Motorwelle dient gleichzeitig als Pumpenwelle, auf der das Laufrad befestigt ist. Als Wellendichtung dient eine Balg-Gleitringdichtung, die auf einer Laufradnabe aus Kunststoff sitzt. Hierdurch ist eine sichere Trennung zwischen Schwimmbadwasser und Elektromotor gegeben. Diese Nabe dient als Wellenschutzhülse.
Durch die Blockbauweise haben die Pumpen einen geringen Platzbedarf. Sie werden durch Drehstrommotoren angetrieben.
Die BADU 21er-Pumpen sind für spezielle Herausforderungen in Badewannen, Whirlpools, Gegenstromanlagen und Reinigungsgeräten konzipiert. Die bewährten normalsaugenden Schwimmbadpumpen der Baureihe BADU 21-80 wurden den Kundenbedürfnissen angepasst und werden nun auch als BADU 21-81 standardmäßig mit Klebeverschraubung d 90 mm an Saug- und Druckstutzen ausgeliefert.
Schwimmbad- und Industrie-Filteranlagen, Gegenstrom-Schwimmanlagen, Klimaanlagen, Schwimmbad-Attraktionen, Reinigungsgeräte u.a.m., bis 90 m³/h Förderstrom.
Blockpumpe mit Balg-Gleitringdichtung, auf Kunststoff-Laufradnabe montiert. Druckstutzen um je 90° und zusätzlich um 29° im Uhrzeigersinn drehbar (von der Saugseite gesehen). Elektrische Trennung.
Standard-Klemmkasten-Stellung links. Rechts oder oben auf Anfrage.
Sondermotoren auf Anfrage.
Die Pumpen können in der abgebildeten Ausführung für Schwimmbeckenwasser bis zu einer Gesamtsalzkonzentration von 0,5% (entsprechend 5 g/l) eingesetzt werden.
Bei höheren Salzkonzentrationen bitten wir Sie, Rücksprache mit uns zu halten.
Auch in AK-Version erhältlich
Login
Accessory Items
Non self-priming pool circulation pump BADU 21-80/32 G Dr., three-phase version, for use with pool and industrial filtration units, counter swim units, air conditioning units, pool attractions, cleaning units and many other applications with a flow rate of up to 90 m³/h. 3~ Y/Δ 400/230 Volt Hmax= 12,5 m Qmax= 75 m³/h techQ: 60 m³/h techH: 8 m WS Power output: 2.60 kW Inlet Sa / outlet connection Da (G): 2 3/4" / 2 3/4" Pool size in m³: 30 - 100 Flow rate Q in m³/h: 60 Total head H in m WS: 8 Motor performance in kW (P2): 2.60 Pump casing: PPE GF 30 Gland housing: PPE GF 30 Impeller: POM GF 30 / PP GF 30 Mechanical seal: carbon / ceramic / NBR Screws: Galvanised steel Impeller nut: PP GF 30 Wear ring: Stainless steel 1.4301 Motor shaft: Stainless steel 1.4057 The BADU 21 range pumps are designed for the specific demands of bath tubs, whirlpools, counter swim units and cleaning devices. All models in this range are non-self-priming circulation pumps, which cannot handle air. These pumps are to be installed below the water level in order for the pool water to drain independantly. Field of application Pool and industrial filtration units, counter swim units, air conditioning units, pool attractions, cleaning units and many other applications with a flow rate of up to 90 m³/h. Design Monoblock-type pump with a bellow-type mechanical seal mounted on a plastic shaft protector sleeve. Discharge outlet swivels gradually by 90° and additionally by 29° clockwise when viewing the pump from the suction side. Complete electrical separation. Standard terminal box position on the left side. Position on the right side or on top on request. We recommend sealing the pump suction and pressure line in the thread. BADU 21-80/.. SG conditionally self-priming up to 0.5 m, on request. Special motors on request. The above mentioned pumps can be used for pool water with a salt concentration of up to 0.5%, i. e. 5 g/l. For higher salt concentrations please contact us. Also available in AK version
Non self-priming pool circulation pump BADU 21-80/32R G 29° We., alternating current version, replacement pump for BADU Jet Classic counter swim unit for use with pool and industrial filtration units, counter swim units, air conditioning units, pool attractions, cleaning units and many other applications with a flow rate of up to 90 m³/h. 1~230 Volt Hmax= 11,8 m Qmax= 73 m³/h techQ: 72 m³/h techH: 12 m WS Power output: 2.20 kW Inlet Sa / outlet connection Da (G): 2 3/4" / 2 3/4" Pool size in m³: 30 - 100 Flow rate Q in m³/h: 72 Total head H in m WS: 12 Motor performance in kW (P2): 2.20 Pump casing: PPE GF 30 Gland housing: PPE GF 30 Impeller: POM GF 30 / PP GF 30 Mechanical seal: carbon / ceramic / NBR Screws: Galvanised steel Impeller nut: PP GF 30 Wear ring: Stainless steel 1.4301 Motor shaft: Stainless steel 1.4057 The BADU 21 range pumps are designed for the specific demands of bath tubs, whirlpools, counter swim units and cleaning devices. All models in this range are non-self-priming circulation pumps, which cannot handle air. These pumps are to be installed below the water level in order for the pool water to drain independantly. Field of application Pool and industrial filtration units, counter swim units, air conditioning units, pool attractions, cleaning units and many other applications with a flow rate of up to 90 m³/h. Design Monoblock-type pump with a bellow-type mechanical seal mounted on a plastic shaft protector sleeve. Discharge outlet swivels gradually by 90° and additionally by 29° clockwise when viewing the pump from the suction side. Complete electrical separation. Standard terminal box position on the left side. Position on the right side or on top on request. We recommend sealing the pump suction and pressure line in the thread. BADU 21-80/.. SG conditionally self-priming up to 0.5 m, on request. Special motors on request. The above mentioned pumps can be used for pool water with a salt concentration of up to 0.5%, i. e. 5 g/l. For higher salt concentrations please contact us. Also available in AK version
Non-self-priming circulation pump BADU 21-80/32 G-AK-SSV, Dr., three-phase current, lantern version, for use with diverse salt water and problem medium 3~ Y/Δ 400/230 V Mechanical seal SIC/SIC + VITON Hmax= 12.5 m Qmax= 75 m³/h techQ: 40 m³/h techH: 12 m WS power output: 2.60 kW Inlet / outlet connection (G): male thread 2 3/4" / 2 3/4" Description The plastic centrifugal pumps BADU 21-AK are designed for circulation of pool water with a higher salt or brine concentration in combination with a corresponding filtration unit. These pumps meet the highest demands by means of best quality and workmanship. Constructional features Corrosion-resistant – due to high-grade, glass fiber reinforced plastic Monoblock-type pump with a closed bellows-type mechanical seal mounted on a plastic shaft protector sleeve. Motor/pump shaft has no contact with the pool water! Complete electrical separation. Field of application Thermal water, thermal brine, seawater aquarium with artificially processed salt water, pickle units and several problem media after testing of components and concentration. Generally, the exact medium should be specified during the placement of the order, so that suitability and resistance of the pumps may be verified. Design The special version AK pumps correspond to the standard versions in the BADU programme, however they are designed for use in diverse salt water and problem medias. Media that could potentially leak or minerals and salts which could crystallise do not come into contact with the motor or bearings. Therefore this ensures considerably longer operating times for these fields of application compared to the standard version.