Replacement pump BADU 21-80/33 G 29° We., alternating current version, for BADU Jet Super-Sport counter swim unit Non self-priming pool circulation pump for use with pool and industrial filtration units, counter swim units, air conditioning units, pool attractions, cleaning units and many other applications with a flow rate of up to 90 m³/h. 1~230 Volt Hmax= 13,8 m Qmax= 80 m³/h techQ: 74 m³/h techH: 8 m WS Power output: 3.00 kW Inlet Sa  / outlet connection Da (G): 2 3/4"  /  2 3/4"   Pool size in m³: 30 - 100 Total head H in m WS: 8 Flow rate Q in m³/h: 74 Motor performance in kW (P2): 3.00 Pump casing: PPE GF 30 Gland housing: PPE GF 30 Impeller: POM GF 30 / PP GF 30 Mechanical seal: carbon / ceramic / NBR Screws: Galvanised steel Impeller nut: PP GF 30 Wear ring: Stainless steel 1.4301 Motor shaft: Stainless steel 1.4057   The BADU 21 range pumps are designed for the specific demands of bath tubs, whirlpools, counter swim units and cleaning devices. All models in this range are non-self-priming circulation pumps, which cannot handle air. These pumps are to be installed below the water level in order for the pool water to drain independantly. Field of application Pool and industrial filtration units, counter swim units, air conditioning units, pool attractions, cleaning units and many other applications with a flow rate of up to 90 m³/h. Design Monoblock-type pump with a bellow-type mechanical seal mounted on a plastic shaft protector sleeve. Discharge outlet swivelled gradually by 29° clockwise when viewing the pump from the suction side. Complete electrical separation. Standard terminal box position on the left side. Position on the right side or on top on request. We recommend sealing the pump suction and pressure line in the thread. BADU 21-80/.. SG conditionally self-priming up to 0.5 m, on request. Special motors on request. The above mentioned pumps can be used for pool water with a salt concentration of up to 0.5%, i. e. 5 g/l. For higher salt concentrations please contact us. Also available in AK version

Replacement pump BADU 21-80/33 G 29° Dr., three-phase version, for BADU Jet Super-Sport counter swim unit Non self-priming pool circulation pump for use with pool and industrial filtration units, counter swim units, air conditioning units, pool attractions, cleaning units and many other applications with a flow rate of up to 90 m³/h. 3~ Y/Δ 400/230 Volt Hmax= 13,8 m Qmax= 80 m³/h techQ: 74 m³/h techH: 8 m WS Power output: 3.00 kW Inlet Sa  / outlet connection Da (G): 2 3/4"  /  2 3/4"   Pool size in m³: 30 - 100 Total head H in m WS: 8 Flow rate Q in m³/h: 74 Motor performance in kW (P2): 3.00 Pump casing: PPE GF 30 Gland housing: PPE GF 30 Impeller: POM GF 30 / PP GF 30 Mechanical seal: carbon / ceramic / NBR Screws: Galvanised steel Impeller nut: PP GF 30 Wear ring: Stainless steel 1.4301 Motor shaft: Stainless steel 1.4057   The BADU 21 range pumps are designed for the specific demands of bath tubs, whirlpools, counter swim units and cleaning devices. All models in this range are non-self-priming circulation pumps, which cannot handle air. These pumps are to be installed below the water level in order for the pool water to drain independantly. Field of application Pool and industrial filtration units, counter swim units, air conditioning units, pool attractions, cleaning units and many other applications with a flow rate of up to 90 m³/h. Design Monoblock-type pump with a bellow-type mechanical seal mounted on a plastic shaft protector sleeve. Discharge outlet swivelled gradually by 29° clockwise when viewing the pump from the suction side. Complete electrical separation. Standard terminal box position on the left side. Position on the right side or on top on request. We recommend sealing the pump suction and pressure line in the thread. BADU 21-80/.. SG conditionally self-priming up to 0.5 m, on request. Special motors on request. The above mentioned pumps can be used for pool water with a salt concentration of up to 0.5%, i. e. 5 g/l. For higher salt concentrations please contact us. Also available in AK version

Pressure line complete, assembled, for BADU Jet Super-Sport counter-swim units, consisting of: - Hose adapter, R 2 1/2 x 63 mm, brass - PVC hose, 65 x 7 x 125 mm, not reinforced - 4x Hose clamp, S 78/20 W1 - Fly nut G 2 1/2 with hose adapter 65 mm and gasket, brass - Seal, 71 x 61 x 2 mm - Drain cap, G 2, brass - Seal for drain cap, 57 x 2 mm - Special reducer angle, Rp 2 3/4 x 2 1/2 x 2,brass, note: angle cpl. = 77 - 79   No longer available, please contact us for a replacement

Schaltkasten in Drehstromausführung, komplett, Pos.80/1 - 83, für Gegenstromanlage BADU Jet Super-Sport, unter anderem bestehend aus: - Motorschutzrelais mit Schütz - Stromstoßschalter - Druckwandler - 2 Stck. Kabelverschraubung, M 20 x 1,5, grau - 2 Stck. Gegenmutter, M 20 x 1,5, grau - Sicherungselement kpl. mit Trennklemme, Sicherungsstecker und Feinsicherung - Feinsicherung, 3,15 A   (Abb. ähnlich)

Schaltkasten in Wechselstromausführung, komplett, Pos.80/1 - 83, für Gegenstromanlage BADU Jet Super-Sport, unter anderem bestehend aus: - Motorschutzrelais mit Schütz - Stromstoßschalter - Druckwandler - 2 Stck. Kabelverschraubung, M 20 x 1,5, grau - 2 Stck. Gegenmutter, M 20 x 1,5, grau - Sicherungselement kpl. mit Trennklemme, Sicherungsstecker und Feinsicherung - Feinsicherung, 3,15 A   (Abb. ähnlich)

Suction line, complete, assembled, for counter-swim unit BADU Jet Super-Sport, consisting of: - 2x Hose clamp, S 87/20 W1, Pos.69 - PVC hose, 70 x 8 x 150 mm, not reinforced, Pos.70 - Hose adapter, R 2 1/2 x 73 mm, brass, Pos.71 - Fly nut G 2 3/4 with hose adapter 73 mm and gasket, brass, Pos.72 No longer available, please contact us for a replacement