Spare parts for Speck BADU pool products
Any spare part of the brand Speck Pumpen you might not be able to find in our shop, we will offer to you shortly. Please do not hesitate to contact us with your request, we will attend to it immediately.
Please observe the manufacturers' recommendation that any work on the pumps should only be executed by experienced personnel with the following qualification:
– for mechanical work, for example change of ball-bearing or of mechanical seal: qualified mechanic.
– for work at the electrical system: electrician.
Source of brand logo in high resolution: SPECK Pumpen
Anschluss-Set komplett, d-innen = 25 + 32mm, für Messwasserpumpe 1 und Messwasserpumpe 2 bestehend aus: 1 x Bundbuchse 25mm, 1 x Bundbuchse 32mm, 1 x O-Ring 50 x 3mm und 2 x Überwurfmutter für Bundbuchse d = 50mm
Anschluss-Set kpl., 50 mm und 63 mm, für Swim-tec Super Pump Premium 12, bestehend aus: 2 x Überwurfmutter für Bundbuchse D = 63 + 75mm 1 x Bundbuchse D-Innen = 50 mm für Überwurfmutter 63 +75 mm, schwarz 1 x Bundbuchse D-Innen = 63 mm für Überwurfmutter 63 +75 mm, schwarz 2 x O-Ring für Saug- und Druckanschluss, 68x3,5mm, Perbunan NICHT geeignet für Super Pump 12
Anschluss-Set kpl., 63 mm, für Swim-tec Super Pump Premium 15, bestehend aus: 2 x Überwurfmutter für Bundbuchse D = 63 + 75mm 2 x Bundbuchse D-Innen = 63 mm für Überwurfmutter 63 +75 mm, schwarz 2 x O-Ring für Saug- und Druckanschluss, 68x3,5mm, Perbunan
Anschluss-Set kpl., 50 mm, für Swim-tec Super Pump Premium 6 und Super Pump Premium 8, bestehend aus: 2 x Überwurfmutter für Bundbuchse D = 63 + 75 mm 2 x Bundbuchse D-Innen = 50 mm für Bundbuchse 63 + 75 mm, schwarz 2 x O-Ring für Saug- und Druckanschluss, 68x3,5 mm, Perbunan NICHT geeignet für Super Pump 8
Antriebsriemen lang, für BADU (Aqua) Queen automatische Poolreiniger vor Baujahr 1995, Nr. 2303 V, Pos. 43 NICHT als Ersatz für die blauen Antriebsriemen geeignet! B: ca. 5 cm, Stärke: ca. 1,3 cm, D: ca. 30 cm, L: ca. 80 cm
Antriebsriemen kurz, für BADU Queen automatische Poolreiniger ab Baujahr 1995, Nr. 1307 V, Pos. 43
Antriebsriemen, grau, 23002, für Speck BADU Shark automatische Poolreinger, Pos. 12 ( 1 Stück )
Antriebsrolle, Nr. 26005, für Speck BADU Shark automatische Poolreiniger, Pos. 2, ( 1 Stück )
Useful assembly aid for installing the mechanical seal, 14 mm, safely on the impeller shaft of the pump. For Speck BADU pool circulation pumps series BADU Picco, BADU Magic, BADU Eco Touch-pro, BADU Top, BADU Top S, Bettar, Super Pump 8 - Super Pump 14, Super Pump Premium 6 - Super Pump Premium 15, BADU 40/6 - BADU 40/11, BADU 90/7 - BADU 90/13, BADU Prime 7 - BADU Prime 13, BADU EasyFit 9 - BADU EasyFit 18, BADU Bronze 7 - BADU Bronze 15, BADU FA 42/6, BADU FA 42/9, BADU 42/6, BADU 42/9, BADU 42/12, BADU 73-1, BADU 73-2, BADU 44/4 - BADU 44/15, BADU 45/6 - BADU 45/16, BADU 46/5 - BADU 46/22, BADU 47/5 - BADU 47/22, BADU 21-40, BADU 21-41, BADU Star NOTICE BY SPECK PUMPS: Before turning the pump on after a long period of disuse (e.g. winter), check to make sure that it can be moved easily. To do this, rotate the motor shaft lightly with the help of a screwdriver. Should the motor stick at all, this will loosen it. Should the pump still remain tight or an unusual noise become audible, have the pump examined by a trained professional
Aufnahme für Berührungsstange für BADU Queen automatische Poolreiniger ab Baujahr 1995, Nr. 1707, Pos. 33
Aufsatz mit Druckstutzen Rp 1 1/2 für BADU Star 69/24, BADU Star 913/24, BADU Star 69/36 und BADU Star 913/36, Pos.132.1
Replacement pump BADU 21-80/33 G 29° We., alternating current version, for BADU Jet Super-Sport counter swim unit Non self-priming pool circulation pump for use with pool and industrial filtration units, counter swim units, air conditioning units, pool attractions, cleaning units and many other applications with a flow rate of up to 90 m³/h. 1~230 Volt Hmax= 13,8 m Qmax= 80 m³/h techQ: 74 m³/h techH: 8 m WS Power output: 3.00 kW Inlet Sa / outlet connection Da (G): 2 3/4" / 2 3/4" Pool size in m³: 30 - 100 Total head H in m WS: 8 Flow rate Q in m³/h: 74 Motor performance in kW (P2): 3.00 Pump casing: PPE GF 30 Gland housing: PPE GF 30 Impeller: POM GF 30 / PP GF 30 Mechanical seal: carbon / ceramic / NBR Screws: Galvanised steel Impeller nut: PP GF 30 Wear ring: Stainless steel 1.4301 Motor shaft: Stainless steel 1.4057 The BADU 21 range pumps are designed for the specific demands of bath tubs, whirlpools, counter swim units and cleaning devices. All models in this range are non-self-priming circulation pumps, which cannot handle air. These pumps are to be installed below the water level in order for the pool water to drain independantly. Field of application Pool and industrial filtration units, counter swim units, air conditioning units, pool attractions, cleaning units and many other applications with a flow rate of up to 90 m³/h. Design Monoblock-type pump with a bellow-type mechanical seal mounted on a plastic shaft protector sleeve. Discharge outlet swivelled gradually by 29° clockwise when viewing the pump from the suction side. Complete electrical separation. Standard terminal box position on the left side. Position on the right side or on top on request. We recommend sealing the pump suction and pressure line in the thread. BADU 21-80/.. SG conditionally self-priming up to 0.5 m, on request. Special motors on request. The above mentioned pumps can be used for pool water with a salt concentration of up to 0.5%, i. e. 5 g/l. For higher salt concentrations please contact us. Also available in AK version
Replacement pump BADU 21-80/33 G 29° Dr., three-phase version, for BADU Jet Super-Sport counter swim unit Non self-priming pool circulation pump for use with pool and industrial filtration units, counter swim units, air conditioning units, pool attractions, cleaning units and many other applications with a flow rate of up to 90 m³/h. 3~ Y/Δ 400/230 Volt Hmax= 13,8 m Qmax= 80 m³/h techQ: 74 m³/h techH: 8 m WS Power output: 3.00 kW Inlet Sa / outlet connection Da (G): 2 3/4" / 2 3/4" Pool size in m³: 30 - 100 Total head H in m WS: 8 Flow rate Q in m³/h: 74 Motor performance in kW (P2): 3.00 Pump casing: PPE GF 30 Gland housing: PPE GF 30 Impeller: POM GF 30 / PP GF 30 Mechanical seal: carbon / ceramic / NBR Screws: Galvanised steel Impeller nut: PP GF 30 Wear ring: Stainless steel 1.4301 Motor shaft: Stainless steel 1.4057 The BADU 21 range pumps are designed for the specific demands of bath tubs, whirlpools, counter swim units and cleaning devices. All models in this range are non-self-priming circulation pumps, which cannot handle air. These pumps are to be installed below the water level in order for the pool water to drain independantly. Field of application Pool and industrial filtration units, counter swim units, air conditioning units, pool attractions, cleaning units and many other applications with a flow rate of up to 90 m³/h. Design Monoblock-type pump with a bellow-type mechanical seal mounted on a plastic shaft protector sleeve. Discharge outlet swivelled gradually by 29° clockwise when viewing the pump from the suction side. Complete electrical separation. Standard terminal box position on the left side. Position on the right side or on top on request. We recommend sealing the pump suction and pressure line in the thread. BADU 21-80/.. SG conditionally self-priming up to 0.5 m, on request. Special motors on request. The above mentioned pumps can be used for pool water with a salt concentration of up to 0.5%, i. e. 5 g/l. For higher salt concentrations please contact us. Also available in AK version
Ball-bearing for Super Pump Premium 12, A-side (pump side), C3GJN-with special grease (applications with up to appr. 150°C)
Ball-bearing for BADU Magic 4, BADU Magic II/4, BADU Magic 6, BADU Magic II/6, B-side (fan side), C3GJN-with special grease (applications with up to appr. 150°C) Attention! Older pump models may contain the bearing size 6201: Ball-bearing 6201
Ball-bearing for BADU Magic 8, BADU Magic II/8, BADU Magic 11, BADU Magic II/11, BADU Top II/12, B-side (fan side), C3GJN-with special grease (applications with up to appr. 150°C)
Ball-bearing for Super Pump Premium 12, B-side (fan side), C3GJN-with special grease (applications with up to appr. 150°C)
Bolzen für Filtergehäuse für BADU Queen automatische Poolreiniger ab Baujahr 1995, Nr. 7815, Pos. 4 (1 Stück)
Capacitor without bolt, 12 µF +/- 5%, S3, 50-60 Hz, for BADU Top II/12 (from approx. 08/2023), Super Pump Premium 12, Aqua Plus 8, Trend 90, Aqua Plus 11, Trend 110, Aqua Maxi 5, Aqua Maxi 10, Aqua Master 10, Aqua Master 14, BADU EasyFit 9 We., BADU EasyFit 12 We., BADU SuperPro 8, BADU SuperPro 9, BADU SuperPro 11, BADU SuperPro12, BADU 45/6, BADU 46/5, BADU 46/10, BADU 47/5, BADU 47/10, Belstar 7, Belstar 50 M, Belstar 10, Belstar 75 M, AquaViva 8, AquaViva 12, PPL Smart 10, Super-Pump 8 LC, Super-Pump 12 LC, BADU Top II/8 LC, BADU Top II/12 LC, Filterpumpe MP 8 LC, Comfort II/8 LC, Waterstar SP115-1, BluePump 12, SUNVAL 11-M, Whitestar 9, Enviro 11, Pro-Pump 11, BADU Magic II/11 LC, Smart II/11 LC BEHNCKE, Filterpumpe MP 12 LC, Comfort II/12 LC, CP Top 50 LC, as replacement for broken motor capacitors. Dimensions: 40 x 63 mm, flexible strands 100 mm, 10 mm stripped. Possible signs of malfunctioning: motor only hums, but does not start, if it is not started manually by pushing the motor fan wings
Capacitor without bolt, 12 µF +/- 5%, S3, 50-60 Hz, for BADU Top II/8 (from approx. 08/2023), Super Pump Premium 12, Aqua Plus 8, Trend 90, Aqua Plus 11, Trend 110, Aqua Maxi 5, Aqua Maxi 10, Aqua Master 10, Aqua Master 14, BADU EasyFit 9 We., BADU EasyFit 12 We., BADU SuperPro 8, BADU SuperPro 9, BADU SuperPro 11, BADU SuperPro12, BADU 45/6, BADU 46/5, BADU 46/10, BADU 47/5, BADU 47/10, Belstar 7, Belstar 50 M, Belstar 10, Belstar 75 M, AquaViva 8, AquaViva 12, PPL Smart 10, Super-Pump 8 LC, Super-Pump 12 LC, BADU Top II/8 LC, BADU Top S II/12 LC, BADU Top II/12 LC, Filterpumpe MP 8 LC, Comfort II/8 LC, Waterstar SP115-1, BluePump 12, SUNVAL 11-M, Whitestar 9, Enviro 11, Pro-Pump 11, BADU Magic II/11 LC, Smart II/11 LC BEHNCKE, Filterpumpe MP 12 LC, Comfort II/12 LC, CP Top 50 LC, as replacement for broken motor capacitors. Dimensions: 40 x 63 mm, flexible strands 100 mm, 10 mm stripped. Possible signs of malfunctioning: motor only hums, but does not start, if it is not started manually by pushing the motor fan wings
Capacitor without bolt, 12 µF +/- 5%, S3, 50-60 Hz, for BADU Top S II/12 (from approx. 08/2023), Super Pump Premium 12, Aqua Plus 8, Trend 90, Aqua Plus 11, Trend 110, Aqua Maxi 5, Aqua Maxi 10, Aqua Master 10, Aqua Master 14, BADU EasyFit 9 We., BADU EasyFit 12 We., BADU SuperPro 8, BADU SuperPro 9, BADU SuperPro 11, BADU SuperPro12, BADU 45/6, BADU 46/5, BADU 46/10, BADU 47/5, BADU 47/10, Belstar 7, Belstar 50 M, Belstar 10, Belstar 75 M, AquaViva 8, AquaViva 12, PPL Smart 10, Super-Pump 8 LC, Super-Pump 12 LC, BADU Top II/8 LC, BADU Top II/12 LC, Filterpumpe MP 8 LC, Comfort II/8 LC, Waterstar SP115-1, BluePump 12, SUNVAL 11-M, Whitestar 9, Enviro 11, Pro-Pump 11, BADU Magic II/11 LC, Smart II/11 LC BEHNCKE, Filterpumpe MP 12 LC, Comfort II/12 LC, CP Top 50 LC, as replacement for broken motor capacitors. Dimensions: 40 x 63 mm, flexible strands 100 mm, 10 mm stripped. Possible signs of malfunctioning: motor only hums, but does not start, if it is not started manually by pushing the motor fan wings
Capacitor without bolt, 12 µF +/- 5%, S3, 50-60 Hz, for BADU Top S II/8 (from approx. 08/2023), Super Pump Premium 12, Aqua Plus 8, Trend 90, Aqua Plus 11, Trend 110, Aqua Maxi 5, Aqua Maxi 10, Aqua Master 10, Aqua Master 14, BADU EasyFit 9 We., BADU EasyFit 12 We., BADU SuperPro 8, BADU SuperPro 9, BADU SuperPro 11, BADU SuperPro12, BADU 45/6, BADU 46/5, BADU 46/10, BADU 47/5, BADU 47/10, Belstar 7, Belstar 50 M, Belstar 10, Belstar 75 M, AquaViva 8, AquaViva 12, PPL Smart 10, Super-Pump 8 LC, Super-Pump 12 LC, BADU Top II/8 LC, BADU Top S II/12 LC, BADU Top II/12 LC, Filterpumpe MP 8 LC, Comfort II/8 LC, Waterstar SP115-1, BluePump 12, SUNVAL 11-M, Whitestar 9, Enviro 11, Pro-Pump 11, BADU Magic II/11 LC, Smart II/11 LC BEHNCKE, Filterpumpe MP 12 LC, Comfort II/12 LC, CP Top 50 LC, as replacement for broken motor capacitors. Dimensions: 40 x 63 mm, flexible strands 100 mm, 10 mm stripped. Possible signs of malfunctioning: motor only hums, but does not start, if it is not started manually by pushing the motor fan wings
Capacitor without bolt, 16 µF +/- 5%, S0, 50-60 Hz, for Super Pump 14 (until 12/16), BADU Magic 8, BADU Magic 11, Bettar 12, BADU Top 12, Super Pump 12, BADU 90/13, BADU Bronze 14, BADU 40/6 (since 1/95 for 0,3 kW), BADU 40/7 (since 1/95 for 0,3 kW), BADU 42/6 (since 1/95 for 0,3 kW), BADU 90/7 (since 1/95 for 0,3 kW), BADU Star 69 (since 1/95 for 0,3 kW), BADU Bronze 7 (since 1/95 for 0,3 kW), BADU 40/9 (since 1/95), BADU 40/11 (since 1/95), BADU 42/9 (since 1/95), BADU Bronze 11 (since 1/95), BADU 90/11 (since 1/95), BADU Star 913 (since 1/95), as replacement for broken motor capacitors Possible signs of malfunctioning: motor only hums, but does not start, if it is not started manually by pushing the motor fan wings
Capacitor without bolt, 12 µF +/- 5%, S3, 50-60 Hz, for Super Pump Premium 12, Super Pump Premium 8, Aqua Plus 8, Trend 90, Aqua Plus 11, Trend 110, Aqua Maxi 5, Aqua Maxi 10, Aqua Master 10, Aqua Master 14, BADU EasyFit 9 We., BADU EasyFit 12 We., BADU SuperPro 8, BADU SuperPro 9, BADU SuperPro 11, BADU SuperPro12, BADU 45/6, BADU 46/5, BADU 46/10, BADU 47/5, BADU 47/10, Belstar 7, Belstar 50 M, Belstar 10, Belstar 75 M, AquaViva 8, AquaViva 12, PPL Smart 10, Super-Pump 8 LC, Super-Pump 12 LC, BADU Top S II/8 LC, BADU Top II/8 LC, BADU Top S II/12 LC, BADU Top II/12 LC, Filterpumpe MP 8 LC, Comfort II/8 LC, Waterstar SP115-1, BluePump 12, SUNVAL 11-M, Whitestar 9, Enviro 11, Pro-Pump 11, BADU Magic II/11 LC, Smart II/11 LC BEHNCKE, Filterpumpe MP 12 LC, Comfort II/12 LC, CP Top 50 LC, as replacement for broken motor capacitors. Dimensions: 40 x 63 mm, flexible strands 100 mm, 10 mm stripped. Possible signs of malfunctioning: motor only hums, but does not start, if it is not started manually by pushing the motor fan wings