Self-priming, complete filter unit BADU Eco Star 12 with frequency controllable alternating current version motor, including 12 cartridges 1~ 230 VH max. = approx. 14,9 mQ max. = approx. 15 m³/h Pool size: up to approx. 80 m³ Power input P1/output P2 (kW): 0,05-0,63/0,03-0,50 Inlet / outlet connection(Rp): 1 1/2" / 1 1/2" Self-priming, complete filter unit with no backwashing. For crystal clear fun in the pool. Field of application Pool water filtration in privately owned pools, can be installed max. 3 m above or below water level. Doesn't require a waste water connection since it requires no backwashing. This also ensures an environmentally safe operation mode! Design Cartridge filter with strainer tank, transparent lid and pressure gauge in one compact unit, ready for connection. Motor/pump shaft has no contact with the pool water providing complete electrical separation. Mode of operation BADU Eco Star is self-priming (to approx. 3 m geodetic) and pumps the pool water from the pool, via its front-end lint trap (for leaves etc.) and forces it through the fine mesh filter cartridges (approx. 50 µm) in order to return it to the pool crystal clear. No backwashing necessary! The pressure gauge indicates the degree of contamination of the filter cartridges. The latter can be cleaned by hosing them down or just by putting them into any household washer (temperatures up to 30 °C). Do not spin dry!   Pool equipment: Filter unit Screws: stainless steel 1.4301 Parts in contact with water: PP GF 30 Filter cartridges: synthetic fiber material, mesh approx. 50 µm Cartridge pipe: PVC Transparent lid: SAN, transparent   The above mentioned pumps can be used for pool water with a salt concentration of up to 0.5%, i. e. 5 g/l. For higher salt concentrations please contact us. Also available in AK version

Self-priming, complete filter unit BADU Eco Star 24 with frequency controllable alternating current version motor, including 24 cartridges 1~ 230 VH max. = approx. 14,9 mQ max. = approx. 15 m³/h Pool size: up to approx. 80 m³ Power input P1/output P2 (kW): 0,05-0,63/0,03-0,50 Inlet / outlet connection(Rp): 1 1/2" / 1 1/2" Self-priming, complete filter unit with no backwashing. For crystal clear fun in the pool. Field of application Pool water filtration in privately owned pools, can be installed max. 3 m above or below water level. Doesn't require a waste water connection since it requires no backwashing. This also ensures an environmentally safe operation mode! Design Cartridge filter with strainer tank, transparent lid and pressure gauge in one compact unit, ready for connection. Motor/pump shaft has no contact with the pool water providing complete electrical separation. Mode of operation BADU Eco Star is self-priming (to approx. 3 m geodetic) and pumps the pool water from the pool, via its front-end lint trap (for leaves etc.) and forces it through the fine mesh filter cartridges (approx. 50 µm) in order to return it to the pool crystal clear. No backwashing necessary! The pressure gauge indicates the degree of contamination of the filter cartridges. The latter can be cleaned by hosing them down or just by putting them into any household washer (temperatures up to 30 °C). Do not spin dry!   Pool equipment: Filter unit Screws: stainless steel 1.4301 Parts in contact with water: PP GF 30 Filter cartridges: synthetic fiber material, mesh approx. 50 µm Cartridge pipe: PVC Transparent lid: SAN, transparent   The above mentioned pumps can be used for pool water with a salt concentration of up to 0.5%, i. e. 5 g/l. For higher salt concentrations please contact us. Also available in AK version

Self-priming, complete filter unit BADU Star 69/12 We., alternating current version, for 12 cartridges, for pool sizes of approximately 30-60 m³, including 12 cartridges 1~ 230 V H max. = 11,0 m Q max. = 11 m³/h techQ: 5 m³/h techH: 8 m WS Pool size: 30 - 60 m³ Power output: 0.30 kW Inlet / outlet connection(Rp): 1 1/2" / 1 1/2" Self-priming, complete filter unit with no backwashing. For crystal clear fun in the pool. Field of application Pool water filtration in privately owned pools, can be installed max. 3 m above or below water level. Doesn't require a waste water connection since it requires no backwashing. This also ensures an environmentally safe operation mode! Design Cartridge filter with strainer tank, transparent lid and pressure gauge in one compact unit, ready for connection. Motor/pump shaft has no contact with the pool water providing complete electrical separation. Mode of operation BADU Star is self-priming (to approx. 3 m geodetic) and pumps the pool water from the pool, via its front-end lint trap (for leaves etc.) and forces it through the fine mesh filter cartridges (approx. 50 µm) in order to return it to the pool crystal clear. No backwashing necessary! The pressure gauge indicates the degree of contamination of the filter cartridges. The latter can be cleaned by hosing them down or just by putting them into any household washer (temperatures up to 30 °C). Do not spin dry!   Pool equipment: Filter unit Pool size in m³: 30 - 60 Flow rate Q in m³/h: 5 Total head H in m WS: 8 Motor performance in kW (P2): 0.30 Screws: stainless steel 1.4301 Parts in contact with water: PP GF 30 Filter cartridges: synthetic fiber material, mesh approx. 50 µm Cartridge pipe: PVC Transparent lid: SAN, transparent Special motors on request. The above mentioned pumps can be used for pool water with a salt concentration of up to 0.5%, i. e. 5 g/l. For higher salt concentrations please contact us. Also available in AK version  

Self-priming, complete filter unit BADU Star 69/12 Dr., three-phase version, for 12 cartridges, for pool sizes of approximately 30-60 m³, including 12 cartridges 3~Y/Δ 400/230 H max. = 11,0 m Q max. = 11 m³/h techQ: 5 m³/h techH: 8 m WS Pool size: 30 - 60 m³ Power output: 0.30 kW Inlet / outlet connection(Rp): 1 1/2" / 1 1/2" Self-priming, complete filter unit with no backwashing. For crystal clear fun in the pool. Field of application Pool water filtration in privately owned pools, can be installed max. 3 m above or below water level. Doesn't require a waste water connection since it requires no backwashing. This also ensures an environmentally safe operation mode! Design Cartridge filter with strainer tank, transparent lid and pressure gauge in one compact unit, ready for connection. Motor/pump shaft has no contact with the pool water providing complete electrical separation. Mode of operation BADU Star is self-priming (to approx. 3 m geodetic) and pumps the pool water from the pool, via its front-end lint trap (for leaves etc.) and forces it through the fine mesh filter cartridges (approx. 50 µm) in order to return it to the pool crystal clear. No backwashing necessary! The pressure gauge indicates the degree of contamination of the filter cartridges. The latter can be cleaned by hosing them down or just by putting them into any household washer (temperatures up to 30 °C). Do not spin dry!   Pool equipment: Filter unit Pool size in m³: 30 - 60 Flow rate Q in m³/h: 5 Total head H in m WS: 8 Motor performance in kW (P2): 0.30 Screws: stainless steel 1.4301 Parts in contact with water: PP GF 30 Filter cartridges: synthetic fiber material, mesh approx. 50 µm Cartridge pipe: PVC Transparent lid: SAN, transparent   Special motors on request. The above mentioned pumps can be used for pool water with a salt concentration of up to 0.5%, i. e. 5 g/l. For higher salt concentrations please contact us. Also available in AK version  

Self-priming, complete filter unit BADU Star 69/12 We., alternating current version, for 12 cartridges, for pool sizes of approximately 30-60 m³, delivered without cartridges 1~ 230 V H max. = 11,0 m Q max. = 11 m³/h techQ: 5 m³/h techH: 8 m WS Pool size: 30 - 60 m³ Power output: 0.30 kW Inlet / outlet connection(Rp): 1 1/2" / 1 1/2" Self-priming, complete filter unit with no backwashing. For crystal clear fun in the pool. Field of application Pool water filtration in privately owned pools, can be installed max. 3 m above or below water level. Doesn't require a waste water connection since it requires no backwashing. This also ensures an environmentally safe operation mode! Design Cartridge filter with strainer tank, transparent lid and pressure gauge in one compact unit, ready for connection. Motor/pump shaft has no contact with the pool water providing complete electrical separation. Mode of operation BADU Star is self-priming (to approx. 3 m geodetic) and pumps the pool water from the pool, via its front-end lint trap (for leaves etc.) and forces it through the fine mesh filter cartridges (approx. 50 µm) in order to return it to the pool crystal clear. No backwashing necessary! The pressure gauge indicates the degree of contamination of the filter cartridges. The latter can be cleaned by hosing them down or just by putting them into any household washer (temperatures up to 30 °C). Do not spin dry!   Pool equipment: Filter unit Pool size in m³: 30 - 60 Flow rate Q in m³/h: 5 Total head H in m WS: 8 Motor performance in kW (P2): 0.30 Screws: stainless steel 1.4301 Parts in contact with water: PP GF 30 Filter cartridges: synthetic fiber material, mesh approx. 50 µm Cartridge pipe: PVC Transparent lid: SAN, transparent   Special motors on request. The above mentioned pumps can be used for pool water with a salt concentration of up to 0.5%, i. e. 5 g/l. For higher salt concentrations please contact us. Also available in AK version

Self-priming, complete filter unit BADU Star 69/12 Dr., three-phase version, for 12 cartridges, for pool sizes of approximately 30-60 m³, delivered without cartridges 3~Y/Δ 400/230 H max. = 11,0 m Q max. = 11 m³/h techQ: 5 m³/h techH: 8 m WS Pool size: 30 - 60 m³ Power output: 0.30 kW Inlet / outlet connection(Rp): 1 1/2" / 1 1/2" Self-priming, complete filter unit with no backwashing. For crystal clear fun in the pool. Field of application Pool water filtration in privately owned pools, can be installed max. 3 m above or below water level. Doesn't require a waste water connection since it requires no backwashing. This also ensures an environmentally safe operation mode! Design Cartridge filter with strainer tank, transparent lid and pressure gauge in one compact unit, ready for connection. Motor/pump shaft has no contact with the pool water providing complete electrical separation. Mode of operation BADU Star is self-priming (to approx. 3 m geodetic) and pumps the pool water from the pool, via its front-end lint trap (for leaves etc.) and forces it through the fine mesh filter cartridges (approx. 50 µm) in order to return it to the pool crystal clear. No backwashing necessary! The pressure gauge indicates the degree of contamination of the filter cartridges. The latter can be cleaned by hosing them down or just by putting them into any household washer (temperatures up to 30 °C). Do not spin dry!   Pool equipment: Filter unit Pool size in m³: 30 - 60 Flow rate Q in m³/h: 5 Total head H in m WS: 8 Motor performance in kW (P2): 0.30 Screws: stainless steel 1.4301 Parts in contact with water: PP GF 30 Filter cartridges: synthetic fiber material, mesh approx. 50 µm Cartridge pipe: PVC Transparent lid: SAN, transparent Special motors on request. The above mentioned pumps can be used for pool water with a salt concentration of up to 0.5%, i. e. 5 g/l. For higher salt concentrations please contact us. Also available in AK version

Self-priming, complete filter unit BADU Star 69/24 We., alternating current version, for 24 cartridges, for pool sizes of approximately 30-60 m³, including 24 cartridges 1~ 230 V H max. = 11,0 m Q max. = 11 m³/h techQ: 5 m³/h techH: 8 m WS Pool size: 30 - 60 m³ Power output: 0.30 kW Inlet / outlet connection(Rp): 1 1/2" / 1 1/2" Self-priming, complete filter unit with no backwashing. For crystal clear fun in the pool. Field of application Pool water filtration in privately owned pools, can be installed max. 3 m above or below water level. Doesn't require a waste water connection since it requires no backwashing. This also ensures an environmentally safe operation mode! Design Cartridge filter with strainer tank, transparent lid and pressure gauge in one compact unit, ready for connection. Motor/pump shaft has no contact with the pool water providing complete electrical separation. Mode of operation BADU Star is self-priming (to approx. 3 m geodetic) and pumps the pool water from the pool, via its front-end lint trap (for leaves etc.) and forces it through the fine mesh filter cartridges (approx. 50 µm) in order to return it to the pool crystal clear. No backwashing necessary! The pressure gauge indicates the degree of contamination of the filter cartridges. The latter can be cleaned by hosing them down or just by putting them into any household washer (temperatures up to 30 °C). Do not spin dry!   Pool equipment: Filter unit Pool size in m³: 30 - 60 Flow rate Q in m³/h: 5 Total head H in m WS: 8 Motor performance in kW (P2): 0.30 Screws: stainless steel 1.4301 Parts in contact with water: PP GF 30 Filter cartridges: synthetic fiber material, mesh approx. 50 µm Cartridge pipe: PVC Transparent lid: SAN, transparent   Special motors on request. The above mentioned pumps can be used for pool water with a salt concentration of up to 0.5%, i. e. 5 g/l. For higher salt concentrations please contact us. Also available in AK version

Self-priming, complete filter unit BADU Star 69/24 Dr., three-phase version, for 24 cartridges, for pool sizes of approximately 30-60 m³, including 24 cartridges 3~Y/Δ 400/230 H max. = 11,0 m Q max. = 11 m³/h techQ: 5 m³/h techH: 8 m WS Pool size: 30 - 60 m³ Power output: 0.30 kW Inlet / outlet connection(Rp): 1 1/2" / 1 1/2" Self-priming, complete filter unit with no backwashing. For crystal clear fun in the pool. Field of application Pool water filtration in privately owned pools, can be installed max. 3 m above or below water level. Doesn't require a waste water connection since it requires no backwashing. This also ensures an environmentally safe operation mode! Design Cartridge filter with strainer tank, transparent lid and pressure gauge in one compact unit, ready for connection. Motor/pump shaft has no contact with the pool water providing complete electrical separation. Mode of operation BADU Star is self-priming (to approx. 3 m geodetic) and pumps the pool water from the pool, via its front-end lint trap (for leaves etc.) and forces it through the fine mesh filter cartridges (approx. 50 µm) in order to return it to the pool crystal clear. No backwashing necessary! The pressure gauge indicates the degree of contamination of the filter cartridges. The latter can be cleaned by hosing them down or just by putting them into any household washer (temperatures up to 30 °C). Do not spin dry!   Pool equipment: Filter unit Pool size in m³: 30 - 60 Flow rate Q in m³/h: 5 Total head H in m WS: 8 Motor performance in kW (P2): 0.30 Screws: stainless steel 1.4301 Parts in contact with water: PP GF 30 Filter cartridges: synthetic fiber material, mesh approx. 50 µm Cartridge pipe: PVC Transparent lid: SAN, transparent   Special motors on request. The above mentioned pumps can be used for pool water with a salt concentration of up to 0.5%, i. e. 5 g/l. For higher salt concentrations please contact us. Also available in AK version  

Self-priming, complete filter unit BADU Star 69/36 We., alternating current version, for 36 cartridges, for pool sizes of approximately 30-60 m³, including 36 cartridges 1~ 230 V H max. = 11,0 m Q max. = 11 m³/h techQ: 5 m³/h techH: 8 m WS Pool size: 30 - 60 m³ Power output: 0.30 kW Inlet / outlet connection(Rp): 1 1/2" / 1 1/2" Self-priming, complete filter unit with no backwashing. For crystal clear fun in the pool. Field of application Pool water filtration in privately owned pools, can be installed max. 3 m above or below water level. Doesn't require a waste water connection since it requires no backwashing. This also ensures an environmentally safe operation mode! Design Cartridge filter with strainer tank, transparent lid and pressure gauge in one compact unit, ready for connection. Motor/pump shaft has no contact with the pool water providing complete electrical separation. Mode of operation BADU Star is self-priming (to approx. 3 m geodetic) and pumps the pool water from the pool, via its front-end lint trap (for leaves etc.) and forces it through the fine mesh filter cartridges (approx. 50 µm) in order to return it to the pool crystal clear. No backwashing necessary! The pressure gauge indicates the degree of contamination of the filter cartridges. The latter can be cleaned by hosing them down or just by putting them into any household washer (temperatures up to 30 °C). Do not spin dry!   Pool size in m³: 30 - 60 Flow rate Q in m³/h: 5 Total head H in m WS: 8 Motor performance in kW (P2): 0.30 Screws: stainless steel 1.4301 Parts in contact with water: PP GF 30 Filter cartridges: synthetic fiber material, mesh approx. 50 µm Cartridge pipe: PVC Transparent lid: SAN, transparent   Special motors on request. The above mentioned pumps can be used for pool water with a salt concentration of up to 0.5%, i. e. 5 g/l. For higher salt concentrations please contact us. Also available in AK version

Self-priming, complete filter unit BADU Star 69/36 Dr., three-phase version, for 36 cartridges, for pool sizes of approximately 30-60 m³, including 36 cartridges 3~Y/Δ 400/230 H max. = 11,0 m Q max. = 11 m³/h techQ: 5 m³/h techH: 8 m WS Pool size: 30 - 60 m³ Power output: 0.30 kW Inlet / outlet connection(Rp): 1 1/2" / 1 1/2" Self-priming, complete filter unit with no backwashing. For crystal clear fun in the pool. Field of application Pool water filtration in privately owned pools, can be installed max. 3 m above or below water level. Doesn't require a waste water connection since it requires no backwashing. This also ensures an environmentally safe operation mode! Design Cartridge filter with strainer tank, transparent lid and pressure gauge in one compact unit, ready for connection. Motor/pump shaft has no contact with the pool water providing complete electrical separation. Mode of operation BADU Star is self-priming (to approx. 3 m geodetic) and pumps the pool water from the pool, via its front-end lint trap (for leaves etc.) and forces it through the fine mesh filter cartridges (approx. 50 µm) in order to return it to the pool crystal clear. No backwashing necessary! The pressure gauge indicates the degree of contamination of the filter cartridges. The latter can be cleaned by hosing them down or just by putting them into any household washer (temperatures up to 30 °C). Do not spin dry!   Pool size in m³: 30 - 60 Flow rate Q in m³/h: 5 Total head H in m WS: 8 Motor performance in kW (P2): 0.30 Screws: stainless steel 1.4301 Parts in contact with water: PP GF 30 Filter cartridges: synthetic fiber material, mesh approx. 50 µm Cartridge pipe: PVC Transparent lid: SAN, transparent   Special motors on request. The above mentioned pumps can be used for pool water with a salt concentration of up to 0.5%, i. e. 5 g/l. For higher salt concentrations please contact us. Also available in AK version

Self-priming, complete filter unit BADU Star 913/12 We., alternating current version, including 12 cartridges, for pool sizes of approximately 60-90 m³ 1~ 230 V H max. = 13,0 m Q max. = 15 m³/h techQ: 10 m³/h techH: 8 m WS Pool size: 60 - 90 m³ Power output: 0.45 kW Inlet / outlet connection(Rp): 1 1/2" / 1 1/2" Self-priming, complete filter unit with no backwashing. For crystal clear fun in the pool. Field of application Pool water filtration in privately owned pools, can be installed max. 3 m above or below water level. Doesn't require a waste water connection since it requires no backwashing. This also ensures an environmentally safe operation mode! Design Cartridge filter with strainer tank, transparent lid and pressure gauge in one compact unit, ready for connection. Motor/pump shaft has no contact with the pool water providing complete electrical separation. Mode of operation BADU Star is self-priming (to approx. 3 m geodetic) and pumps the pool water from the pool, via its front-end lint trap (for leaves etc.) and forces it through the fine mesh filter cartridges (approx. 50 µm) in order to return it to the pool crystal clear. No backwashing necessary! The pressure gauge indicates the degree of contamination of the filter cartridges. The latter can be cleaned by hosing them down or just by putting them into any household washer (temperatures up to 30 °C). Do not spin dry!   Pool equipment: Filter unit Pool size in m³: 60 - 90 Flow rate Q in m³/h: 10 Total head H in m WS: 8 Motor performance in kW (P2): 0.45 Screws: stainless steel 1.4301 Parts in contact with water: PP GF 30 Filter cartridges: synthetic fiber material, mesh approx. 50 µm Cartridge pipe: PVC Transparent lid: SAN, transparent   Special motors on request. The above mentioned pumps can be used for pool water with a salt concentration of up to 0.5%, i. e. 5 g/l. For higher salt concentrations please contact us. Also available in AK version  

Self-priming, complete filter unit BADU Star 913/12 Dr., three-phase version, for 12 cartridges, for pool sizes of approximately 60-90 m³, including 12 cartridges 3~Y/Δ 400/230 H max. = 13,0 m Q max. = 15 m³/h techQ: 10 m³/h techH: 8 m WS Pool size: 60 - 90 m³ Power output: 0.45 kW Inlet / outlet connection(Rp): 1 1/2" / 1 1/2" Self-priming, complete filter unit with no backwashing. For crystal clear fun in the pool. Field of application Pool water filtration in privately owned pools, can be installed max. 3 m above or below water level. Doesn't require a waste water connection since it requires no backwashing. This also ensures an environmentally safe operation mode! Design Cartridge filter with strainer tank, transparent lid and pressure gauge in one compact unit, ready for connection. Motor/pump shaft has no contact with the pool water providing complete electrical separation. Mode of operation BADU Star is self-priming (to approx. 3 m geodetic) and pumps the pool water from the pool, via its front-end lint trap (for leaves etc.) and forces it through the fine mesh filter cartridges (approx. 50 µm) in order to return it to the pool crystal clear. No backwashing necessary! The pressure gauge indicates the degree of contamination of the filter cartridges. The latter can be cleaned by hosing them down or just by putting them into any household washer (temperatures up to 30 °C). Do not spin dry!   Pool equipment: Filter unit Pool size in m³: 60 - 90 Flow rate Q in m³/h: 10 Total head H in m WS: 8 Motor performance in kW (P2): 0.45 Screws: stainless steel 1.4301 Parts in contact with water: PP GF 30 Filter cartridges: synthetic fiber material, mesh approx. 50 µm Cartridge pipe: PVC Transparent lid: SAN, transparent   Special motors on request. The above mentioned pumps can be used for pool water with a salt concentration of up to 0.5%, i. e. 5 g/l. For higher salt concentrations please contact us. Also available in AK version

Self-priming, complete filter unit BADU Star 913/12 We., alternating current version, for 12 cartridges, for pool sizes of approximately 60-90 m³, delivered without cartridges 1~ 230 V H max. = 13,0 m Q max. = 15 m³/h techQ: 10 m³/h techH: 8 m WS Pool size: 60 - 90 m³ Power output: 0.45 kW Inlet / outlet connection(Rp): 1 1/2" / 1 1/2" Self-priming, complete filter unit with no backwashing. For crystal clear fun in the pool. Field of application Pool water filtration in privately owned pools, can be installed max. 3 m above or below water level. Doesn't require a waste water connection since it requires no backwashing. This also ensures an environmentally safe operation mode! Design Cartridge filter with strainer tank, transparent lid and pressure gauge in one compact unit, ready for connection. Motor/pump shaft has no contact with the pool water providing complete electrical separation. Mode of operation BADU Star is self-priming (to approx. 3 m geodetic) and pumps the pool water from the pool, via its front-end lint trap (for leaves etc.) and forces it through the fine mesh filter cartridges (approx. 50 µm) in order to return it to the pool crystal clear. No backwashing necessary! The pressure gauge indicates the degree of contamination of the filter cartridges. The latter can be cleaned by hosing them down or just by putting them into any household washer (temperatures up to 30 °C). Do not spin dry!   Pool equipment: Filter unit Pool size in m³: 60 - 90 Flow rate Q in m³/h: 10 Total head H in m WS: 8 Motor performance in kW (P2): 0.45 Screws: stainless steel 1.4301 Parts in contact with water: PP GF 30 Filter cartridges: synthetic fiber material, mesh approx. 50 µm Cartridge pipe: PVC Transparent lid: SAN, transparent   Special motors on request. The above mentioned pumps can be used for pool water with a salt concentration of up to 0.5%, i. e. 5 g/l. For higher salt concentrations please contact us. Also available in AK version  

Self-priming, complete filter unit BADU Star 913/12 Dr., three-phase version, for 12 cartridges, for pool sizes of approximately 60-90 m³, delivered without cartridges 3~Y/Δ 400/230 H max. = 13,0 m Q max. = 15 m³/h techQ: 10 m³/h techH: 8 m WS Pool size: 60 - 90 m³ Power output: 0.45 kW Inlet / outlet connection(Rp): 1 1/2" / 1 1/2" Self-priming, complete filter unit with no backwashing. For crystal clear fun in the pool. Field of application Pool water filtration in privately owned pools, can be installed max. 3 m above or below water level. Doesn't require a waste water connection since it requires no backwashing. This also ensures an environmentally safe operation mode! Design Cartridge filter with strainer tank, transparent lid and pressure gauge in one compact unit, ready for connection. Motor/pump shaft has no contact with the pool water providing complete electrical separation. Mode of operation BADU Star is self-priming (to approx. 3 m geodetic) and pumps the pool water from the pool, via its front-end lint trap (for leaves etc.) and forces it through the fine mesh filter cartridges (approx. 50 µm) in order to return it to the pool crystal clear. No backwashing necessary! The pressure gauge indicates the degree of contamination of the filter cartridges. The latter can be cleaned by hosing them down or just by putting them into any household washer (temperatures up to 30 °C). Do not spin dry!   Pool equipment: Filter unit Pool size in m³: 60 - 90 Flow rate Q in m³/h: 10 Total head H in m WS: 8 Motor performance in kW (P2): 0.45 Screws: stainless steel 1.4301 Parts in contact with water: PP GF 30 Filter cartridges: synthetic fiber material, mesh approx. 50 µm Cartridge pipe: PVC Transparent lid: SAN, transparent   Special motors on request. The above mentioned pumps can be used for pool water with a salt concentration of up to 0.5%, i. e. 5 g/l. For higher salt concentrations please contact us. Also available in AK version  

Self-priming, complete filter unit BADU Star 913/24 Dr., three-phase version, for 24 cartridges, for pool sizes of approximately 60-90 m³, including 24 cartridges 3~Y/Δ 400/230 H max. = 13,0 m Q max. = 15 m³/h techQ: 10 m³/h techH: 8 m WS Pool size: 60 - 90 m³ Power output: 0.45 kW Inlet / outlet connection(Rp): 1 1/2" / 1 1/2" Self-priming, complete filter unit with no backwashing. For crystal clear fun in the pool. Field of application Pool water filtration in privately owned pools, can be installed max. 3 m above or below water level. Doesn't require a waste water connection since it requires no backwashing. This also ensures an environmentally safe operation mode! Design Cartridge filter with strainer tank, transparent lid and pressure gauge in one compact unit, ready for connection. Motor/pump shaft has no contact with the pool water providing complete electrical separation. Mode of operation BADU Star is self-priming (to approx. 3 m geodetic) and pumps the pool water from the pool, via its front-end lint trap (for leaves etc.) and forces it through the fine mesh filter cartridges (approx. 50 µm) in order to return it to the pool crystal clear. No backwashing necessary! The pressure gauge indicates the degree of contamination of the filter cartridges. The latter can be cleaned by hosing them down or just by putting them into any household washer (temperatures up to 30 °C). Do not spin dry!   Pool equipment: Filter unit Pool size in m³: 60 - 90 Flow rate Q in m³/h: 10 Total head H in m WS: 8 Motor performance in kW (P2): 0.45 Screws: stainless steel 1.4301 Parts in contact with water: PP GF 30 Filter cartridges: synthetic fiber material, mesh approx. 50 µm Cartridge pipe: PVC Transparent lid: SAN, transparent   Special motors on request. The above mentioned pumps can be used for pool water with a salt concentration of up to 0.5%, i. e. 5 g/l. For higher salt concentrations please contact us. Also available in AK version   TECHNICAL DATA manufacturer's page

Selbstansaugender Komplettfilter BADU Star 913/24 We. in Wechselstromausführung inklusive 24 Filterkerzen 1~ 230 V H max. = 13,0 m Q max. = 15 m³/h techQ: 10 m³/h techH: 8 m WS Poolgröße: ca. 60-90 m³ Motorleistung: 0.45 kW Saug/Druck(Rp): 1 1/2" / 1 1/2" Beschreibung: Der BADU Star 913/24 We. in Wechselstromausführung ist für die Schwimmbadwasser-Filtration in Privatbädern konzipiert. Die Pumpe des BADU STAR ist selbstansaugend (bis ca. 3 m geodätisch) und fördert das Badewasser vom Schwimmbecken über seinen vorgeschalteten Fasernfänger (für Blätter u.ä.), drückt es durch die ca. 50 μm feinen Filterkerzen, um es klar gereinigt ins Becken zurückzupumpen. Am Manometer ist der Verschmutzungsgrad der Filterkerzen ablesbar. Diese Polystar Filterkerzen können leicht ausgebaut und durch Absprühen oder auch in der Waschmaschine (bis 30°C) gereinigt werden. Nicht schleudern! Die medienberührten Teile des BADU STAR sind überwiegend aus glasfaserverstärktem Kunststoff hergestellt und haben damit eine exzellente Korrosionsbeständigkeit gegenüber dem Schwimmbadwasser und den zur Wasserpflege üblichen Wasserbehandlungsmitteln. Die Motorwelle dient gleichzeitig als Pumpenwelle, auf der das Laufrad befestigt ist. Als Wellendichtung dient eine Balg-Gleitringdichtung, die auf einer Wellenschutzhülse sitzt. Hierdurch ist eine sichere Trennung zwischen Schwimmbadwasser und Elektromotor gegeben. Durch die optimale Wasserführung und die niedrige Filtergeschwindigkeit erreichen Sie bei richtigem Einbau des BADU STAR einen hohen Wirkungsgrad. Einsatzgebiet: Schwimmbadwasser-Filtration in Privatbädern, aufstellbar oberhalb oder unterhalb des Wasserniveaus jeweils max. 3 m. Benötigt keinen Kanalanschluss, weil keine Rückspülung erforderlich ist und somit sehr umweltfreundlich! Ausführung: Kerzenfilter mit Fasernfänger, Klarsichtdeckel und Manometer als kompakte Einheit, anschlußfertig. Motor- bzw. Pumpenwelle kommt mit dem Schwimmbadwasser nicht in Berührung! Elektrische Trennung. Werkstoffe: Wasserführende Teile: PP GF 30 Schrauben: Edelstahl 1.4301 Filterkerzen: Kunstfasergewebe, ca. 50 μm Maschenweite Kartuschenrohr: PVC Klarsichtdeckel: SAN, transparent  Sondermotoren auf Anfrage. Die Pumpen können in der abgebildeten Ausführung für Schwimmbeckenwasser bis zu einer Gesamtsalzkonzentration von 0,5% (entsprechend 5 g/l) eingesetzt werden. Bei höheren Salzkonzentrationen bitten wir Sie, Rücksprache mit uns zu halten. Auch in AK-Version erhältlich

Self-priming, complete filter unit BADU Star 913/36 We., alternating current version, for 36 cartridges, for pool sizes of approximately 60-90 m³, including 36 cartridges 1~ 230 V H max. = 13,0 m Q max. = 15 m³/h techQ: 10 m³/h techH: 8 m WS Pool size: 60 - 90 m³ Power output: 0.45 kW Inlet / outlet connection(Rp): 1 1/2" / 1 1/2" Self-priming, complete filter unit with no backwashing. For crystal clear fun in the pool. Field of application Pool water filtration in privately owned pools, can be installed max. 3 m above or below water level. Doesn't require a waste water connection since it requires no backwashing. This also ensures an environmentally safe operation mode! Design Cartridge filter with strainer tank, transparent lid and pressure gauge in one compact unit, ready for connection. Motor/pump shaft has no contact with the pool water providing complete electrical separation. Mode of operation BADU Star is self-priming (to approx. 3 m geodetic) and pumps the pool water from the pool, via its front-end lint trap (for leaves etc.) and forces it through the fine mesh filter cartridges (approx. 50 µm) in order to return it to the pool crystal clear. No backwashing necessary! The pressure gauge indicates the degree of contamination of the filter cartridges. The latter can be cleaned by hosing them down or just by putting them into any household washer (temperatures up to 30 °C). Do not spin dry!   Pool equipment: Filter unit Pool size in m³: 60 - 90 Flow rate Q in m³/h: 10 Total head H in m WS: 8 Motor performance in kW (P2): 0.45 Screws: stainless steel 1.4301 Parts in contact with water: PP GF 30 Filter cartridges: synthetic fiber material, mesh approx. 50 µm Cartridge pipe: PVC Transparent lid: SAN, transparent   Special motors on request. The above mentioned pumps can be used for pool water with a salt concentration of up to 0.5%, i. e. 5 g/l. For higher salt concentrations please contact us. Also available in AK version

Selbstansaugender Komplettfilter BADU Star 913/36 Dr. in Drehstromausführung inklusive 36 Filterkerzen, für Beckenvolumen von ca.60-90 m³ 3~Y/Δ 400/230 H max. = 13,0 m Q max. = 15 m³/h techQ: 10 m³/h techH: 8 m WS Poolgröße: ca. 60 - 90 m³ Motorleistung: 0.45 kW Saug/Druck(Rp): 1 1/2" / 1 1/2" Beschreibung: Der BADU Star 913/36 Dr. in Drehstromausführung ist für die Schwimmbadwasser-Filtration in Privatbädern konzipiert. Die Pumpe des BADU STAR ist selbstansaugend (bis ca. 3 m geodätisch) und fördert das Badewasser vom Schwimmbecken über seinen vorgeschalteten Fasernfänger (für Blätter u.ä.), drückt es durch die ca. 50 μm feinen Filterkerzen, um es klar gereinigt ins Becken zurückzupumpen. Am Manometer ist der Verschmutzungsgrad der Filterkerzen ablesbar. Diese Polystar Filterkerzen können leicht ausgebaut und durch Absprühen oder auch in der Waschmaschine (bis 30°C) gereinigt werden. Nicht schleudern! Die medienberührten Teile des BADU STAR sind überwiegend aus glasfaserverstärktem Kunststoff hergestellt und haben damit eine exzellente Korrosionsbeständigkeit gegenüber dem Schwimmbadwasser und den zur Wasserpflege üblichen Wasserbehandlungsmitteln. Die Motorwelle dient gleichzeitig als Pumpenwelle, auf der das Laufrad befestigt ist. Als Wellendichtung dient eine Balg-Gleitringdichtung, die auf einer Wellenschutzhülse sitzt. Hierdurch ist eine sichere Trennung zwischen Schwimmbadwasser und Elektromotor gegeben. Durch die optimale Wasserführung und die niedrige Filtergeschwindigkeit erreichen Sie bei richtigem Einbau des BADU STAR einen hohen Wirkungsgrad. Einsatzgebiet: Schwimmbadwasser-Filtration in Privatbädern, aufstellbar oberhalb oder unterhalb des Wasserniveaus jeweils max. 3 m. Benötigt keinen Kanalanschluss, weil keine Rückspülung erforderlich ist und somit sehr umweltfreundlich! Ausführung: Kerzenfilter mit Fasernfänger, Klarsichtdeckel und Manometer als kompakte Einheit, anschlußfertig. Motor- bzw. Pumpenwelle kommt mit dem Schwimmbadwasser nicht in Berührung! Elektrische Trennung. Werkstoffe: Wasserführende Teile: PP GF 30 Schrauben: Edelstahl 1.4301 Filterkerzen: Kunstfasergewebe, ca. 50 μm Maschenweite Kartuschenrohr: PVC Klarsichtdeckel: SAN, transparent Sondermotoren auf Anfrage. Die Pumpen können in der abgebildeten Ausführung für Schwimmbeckenwasser bis zu einer Gesamtsalzkonzentration von 0,5% (entsprechend 5 g/l) eingesetzt werden. Bei höheren Salzkonzentrationen bitten wir Sie, Rücksprache mit uns zu halten. Auch in AK-Version erhältlich

Original Speck Pumpen Ersatzfilterkerze, Polystar-Langzeitfilterkerze mit einer Feinheit von ca. 50 μm, für BADU Star 69, BADU Star 913, BADU Quick und BADU SF Schutzfilter, Ø 70 x 248 mm (Innendurchmesser ca. 28 mm), Pos. 745   TECHNISCHE DATEN Herstellerseite