Self-priming filtration circulation pump BADU EasyFit 12, alternating current version for pool sizes of approximately 30-60 m³. 1~ 230 V H max. = 15,0 m Q max. = 15,9 m³/h Power input P1 (kW): 0,69 Power output P2 (kW): 0,45 Rated current = 3,20 A Rotational speed = 2840 U/min Inlet/outlet connection(d): 63/50 (6 alternative optional connection variants available)   With the BADU EasyFit the often time-consuming task of installing a new circulation pump into an existing filter unit is a thing of the past. The BADU EasyFit fits almost every unit, regardless of the manufacturer: 6 adaptable connection sets provide inlet and outlet connections which are compatible with varying pipe dimensions and connection options. Variable pump feet ensure that the pump can take over the exact position of the old pump. Here you will find the product video. Field of application Swimming pool water circulation through a filter system. The pump can be installed max. 3 m above or below water level. Design Monoblock-type pump with integrated strainer tank. The bellow-type mechanical seal is mounted on a plastic shaft protector sleeve. Motor/pump shaft has no contact with the pool water providing complete electrical separation.   Pool equipment: Circulation pump Pool size in m³: 30 - 60 Filter size in mm: 500 - 610 Flow rate Q in m³/h: 12 Total head H in m WS: 8 Motor performance in kW (P2): 0.45 Strainer capacity in l: approx. 3 Pool type: Indoor pool, Outdoor pool Installation: Above ground pool, Built-in pool Class: PREMIUM Pump casing: PP GF 30 Diffuser: PP TV 40 / PP GF 30 Impeller: PA 66 GF 30 + PC / PP GF 30 Strainer basket: PP Mechanical seal: carbon / ceramic / NBR Screws: stainless steel Intermediate housing: PP GF 30 Gland housing: PP TV 40 Lid: PC, transparent / PP GF 30   Special motors on request. The above mentioned pumps can be used for pool water with a salt concentration of up to 0.5%, i. e. 5 g/l. For higher salt concentrations please contact us. Also available in AK version  

Self-priming filtration circulation pump BADU EasyFit 12, three-phase version for pool sizes of approximately 30-60 m³. 3~ Y/Δ 400/230 V H max. = 15,0 m Q max. = 15,9 m³/h Power input P1 (kW): 0,66 Power output P2 (kW): 0,45 Rated current = 1,25 / 2,15 A Rotational speed = 2840 U/min Inlet/outlet connection(d): 63/50 (6 alternative optional connection variants available) Weight= 11,0 kg With the BADU EasyFit the often time-consuming task of installing a new circulation pump into an existing filter unit is a thing of the past. The BADU EasyFit fits almost every unit, regardless of the manufacturer: 6 adaptable connection sets provide inlet and outlet connections which are compatible with varying pipe dimensions and connection options. Variable pump feet ensure that the pump can take over the exact position of the old pump. Here you will find the product video. Field of application Swimming pool water circulation through a filter system. The pump can be installed max. 3 m above or below water level. Design Monoblock-type pump with integrated strainer tank. The bellow-type mechanical seal is mounted on a plastic shaft protector sleeve. Motor/pump shaft has no contact with the pool water providing complete electrical separation.   Pool equipment: Circulation pump Pool size in m³: 30 - 60 Filter size in mm: 500 - 610 Flow rate Q in m³/h: 12 Total head H in m WS: 8 Motor performance in kW (P2): 0.45 Strainer capacity in l: approx. 3 Pool type: Indoor pool, Outdoor pool Installation: Above ground pool, Built-in pool Class: PREMIUM Pump casing: PP GF 30 Diffuser: PP TV 40 / PP GF 30 Impeller: PA 66 GF 30 + PC / PP GF 30 Strainer basket: PP Mechanical seal: carbon / ceramic / NBR Screws: stainless steel Intermediate housing: PP GF 30 Gland housing: PP TV 40 Lid: PC, transparent / PP GF 30   Special motors on request. The above mentioned pumps can be used for pool water with a salt concentration of up to 0.5%, i. e. 5 g/l. For higher salt concentrations please contact us. Also available in AK version  

Self-priming filtration circulation pump BADU EasyFit 15, alternating current version, for pool sizes of approximately 60 - 90 m³. 1~230 V H max. = 16,3 m Q max. = 18,9 m³/h Power input P1 (kW): 0,97 Power output P2 (kW): 0,65 Rated current = 4,70 A Rotational speed= 2840 U/min Inlet/outlet connection(d): 63/63 (6 alternative optional connection variants available) Weight= 12,5 kg With the BADU EasyFit the often time-consuming task of installing a new circulation pump into an existing filter unit is a thing of the past. The BADU EasyFit fits almost every unit, regardless of the manufacturer: 6 adaptable connection sets provide inlet and outlet connections which are compatible with varying pipe dimensions and connection options. Variable pump feet ensure that the pump can take over the exact position of the old pump. Here you will find the product video. Field of application Swimming pool water circulation through a filter system. The pump can be installed max. 3 m above or below water level. Design Monoblock-type pump with integrated strainer tank. The bellow-type mechanical seal is mounted on a plastic shaft protector sleeve. Motor/pump shaft has no contact with the pool water providing complete electrical separation.   Pool equipment: Circulation pump Pool size in m³: 60 - 90 Filter size in mm: 610 - 650 Flow rate Q in m³/h: 15 Total head H in m WS: 8 Motor performance in kW (P2): 0.65 Strainer capacity in l: approx. 3 Pool type: Outdoor pool, Indoor pool Installation: Above ground pool, Built-in pool Class: PREMIUM Pump casing: PP GF 30 Diffuser: PP TV 40 / PP GF 30 Impeller: PA 66 GF 30 + PC / PP GF 30 Strainer basket: PP Mechanical seal: carbon / ceramic / NBR Screws: stainless steel Intermediate housing: PP GF 30 Gland housing: PP TV 40 Lid: PC, transparent / PP GF 30   Special motors on request. The above mentioned pumps can be used for pool water with a salt concentration of up to 0.5%, i. e. 5 g/l. For higher salt concentrations please contact us. Also available in AK version    

Self-priming filtration circulation pump BADU EasyFit 15, three-phase version for pool sizes of approximately 60 - 90 m³. 3~ Y/Δ 400/230 V H max. = 16,3 m Q max. = 18,9 m³/h Power input P1 (kW): 0,90 Power output P2 (kW): 0,65 Rated current = 1,75 / 3,00 A Rotational speed = 2840 U/min Inlet/outlet connection(d): 63/63 (6 alternative optional connection variants available) Weight= 12,0 kg With the BADU EasyFit the often time-consuming task of installing a new circulation pump into an existing filter unit is a thing of the past. The BADU EasyFit fits almost every unit, regardless of the manufacturer: 6 adaptable connection sets provide inlet and outlet connections which are compatible with varying pipe dimensions and connection options. Variable pump feet ensure that the pump can take over the exact position of the old pump. Here you will find the product video. Field of application Swimming pool water circulation through a filter system. The pump can be installed max. 3 m above or below water level. Design Monoblock-type pump with integrated strainer tank. The bellow-type mechanical seal is mounted on a plastic shaft protector sleeve. Motor/pump shaft has no contact with the pool water providing complete electrical separation.   Pool equipment: Circulation pump Pool size in m³: 60 - 90 Filter size in mm: 610 - 650 Flow rate Q in m³/h: 15 Total head H in m WS: 8 Motor performance in kW (P2): 0.65 Strainer capacity in l: approx. 3 Pool type: Outdoor pool, Indoor pool Installation: Above ground pool, Built-in pool Class: PREMIUM Pump casing: PP GF 30 Diffuser: PP TV 40 / PP GF 30 Impeller: PA 66 GF 30 + PC / PP GF 30 Strainer basket: PP Mechanical seal: carbon / ceramic / NBR Screws: stainless steel Intermediate housing: PP GF 30 Gland housing: PP TV 40 Lid: PC, transparent / PP GF 30   Special motors on request. The above mentioned pumps can be used for pool water with a salt concentration of up to 0.5%, i. e. 5 g/l. For higher salt concentrations please contact us. Also available in AK version

Self-priming filtration circulation pump BADU EasyFit 18, alternating current version, for pool sizes of approximately 60 - 90 m³. 1~230 V H max. = 17,7 m Q max. = 22,2 m³/h Power input P1 (kW): 1,20 Power output P2 (kW): 0,80 Rated current = 5,30 A Rotational speed = 2840 U/min Inlet/outlet connection(d): 63/63 (6 alternative optional connection variants available) Weight= 13,8 kg With the BADU EasyFit the often time-consuming task of installing a new circulation pump into an existing filter unit is a thing of the past. The BADU EasyFit fits almost every unit, regardless of the manufacturer: 6 adaptable connection sets provide inlet and outlet connections which are compatible with varying pipe dimensions and connection options. Variable pump feet ensure that the pump can take over the exact position of the old pump. Here you will find the product video. Field of application Swimming pool water circulation through a filter system. The pump can be installed max. 3 m above or below water level. Design Monoblock-type pump with integrated strainer tank. The bellow-type mechanical seal is mounted on a plastic shaft protector sleeve. Motor/pump shaft has no contact with the pool water providing complete electrical separation.   Pool equipment: Circulation pump Pool size in m³: 60 - 90 Filter size in mm: 650 - 750 Flow rate Q in m³/h: 18 Total head H in m WS: 8 Motor performance in kW (P2): 0.80 Strainer capacity in l: approx. 3 Pool type: Indoor pool, Outdoor pool Installation: Above ground pool, Built-in pool Class: PREMIUM Pump casing: PP GF 30 Diffuser: PP TV 40 / PP GF 30 Impeller: PA 66 GF 30 + PC / PP GF 30 Strainer basket: PP Mechanical seal: carbon / ceramic / NBR Screws: stainless steel Intermediate housing: PP GF 30 Gland housing: PP TV 40 Lid: PC, transparent / PP GF 30 Special motors on request. The above mentioned pumps can be used for pool water with a salt concentration of up to 0.5%, i. e. 5 g/l. For higher salt concentrations please contact us. Also available in AK version

Self-priming filtration circulation pump BADU EasyFit 18, three-phase version for pool sizes of approximately 60 - 90 m³. 3~ Y/Δ 400/230 V H max. = 17,7 m Q max. = 22,2 m³/h Power input P1 (kW): 1,00 Power output P2 (kW): 0,80 Rated current = 2,10 / 3,60 A Rotational speed = 2840 U/min Inlet/outlet connection(d): 63/63 (6 alternative optional connection variants available) Weight= 13,1 kg With the BADU EasyFit the often time-consuming task of installing a new circulation pump into an existing filter unit is a thing of the past. The BADU EasyFit fits almost every unit, regardless of the manufacturer: 6 adaptable connection sets provide inlet and outlet connections which are compatible with varying pipe dimensions and connection options. Variable pump feet ensure that the pump can take over the exact position of the old pump. Here you will find the product video. Field of application Swimming pool water circulation through a filter system. The pump can be installed max. 3 m above or below water level. Design Monoblock-type pump with integrated strainer tank. The bellow-type mechanical seal is mounted on a plastic shaft protector sleeve. Motor/pump shaft has no contact with the pool water providing complete electrical separation.   Pool equipment: Circulation pump Pool size in m³: 60 - 90 Filter size in mm: 650 - 750 Flow rate Q in m³/h: 18 Total head H in m WS: 8 Motor performance in kW (P2): 0.80 Strainer capacity in l: approx. 3 Pool type: Indoor pool, Outdoor pool Installation: Above ground pool, Built-in pool Class: PREMIUM Pump casing: PP GF 30 Diffuser: PP TV 40 / PP GF 30 Impeller: PA 66 GF 30 + PC / PP GF 30 Strainer basket: PP Mechanical seal: carbon / ceramic / NBR Screws: stainless steel Intermediate housing: PP GF 30 Gland housing: PP TV 40 Lid: PC, transparent / PP GF 30   Special motors on request. The above mentioned pumps can be used for pool water with a salt concentration of up to 0.5%, i. e. 5 g/l. For higher salt concentrations please contact us. Also available in AK version  

Self-priming filtration circulation pump BADU EasyFit 24, alternating current version for pool sizes of approximately 90-120 m³. 1~230 V H max. = 14,0 m Q max. = 28,5 m³/h Power input P1 (kW): 1,45 Power output P2 (kW): 1,00 Rated current = 6,40 A Rotational speed = 2840 U/min Inlet/outlet connection(d): 63/63 (6 alternative optional connection variants available) Weight= 18,2 kg With the BADU EasyFit the often time-consuming task of installing a new circulation pump into an existing filter unit is a thing of the past. The BADU EasyFit fits almost every unit, regardless of the manufacturer: 6 adaptable connection sets provide inlet and outlet connections which are compatible with varying pipe dimensions and connection options. Variable pump feet ensure that the pump can take over the exact position of the old pump. Here you will find the product video. Field of application Swimming pool water circulation through a filter system. The pump can be installed max. 3 m above or below water level. Design Monoblock-type pump with integrated strainer tank. The bellow-type mechanical seal is mounted on a plastic shaft protector sleeve. Motor/pump shaft has no contact with the pool water providing complete electrical separation.   Pool equipment: Circulation pump Pool size in m³: 90 - 120 Filter size in mm: 750 - 800 Flow rate Q in m³/h: 24 Total head H in m WS: 8 Motor performance in kW (P2): 1.00 Strainer capacity in l: approx. 3 Pool type: Outdoor pool, Indoor pool Installation: Above ground pool, Built-in pool Class: PREMIUM Pump casing: PP GF 30 Diffuser: PP TV 40 / PP GF 30 Impeller: PA 66 GF 30 + PC / PP GF 30 Strainer basket: PP Mechanical seal: carbon / ceramic / NBR Screws: stainless steel Intermediate housing: PP GF 30 Gland housing: PP TV 40 Lid: PC, transparent / PP GF 30 Special motors on request. The above mentioned pumps can be used for pool water with a salt concentration of up to 0.5%, i. e. 5 g/l. For higher salt concentrations please contact us. Also available in AK version  

Self-priming filtration circulation pump BADU EasyFit 24, three-phase version for pool sizes of approximately 90 - 120 m³. 3~ Y/Δ 400/230 V H max. = 14,0 m Q max. = 28,5 m³/h Power input P1 (kW): 1,32 Power output P2 (kW): 1,00 Rated current = 2,50 / 4,30 A Rotational speed = 2840 U/min Inlet/outlet connection(d): 63/63 (6 alternative optional connection variants available) Weight= 16,8 kg With the BADU EasyFit the often time-consuming task of installing a new circulation pump into an existing filter unit is a thing of the past. The BADU EasyFit fits almost every unit, regardless of the manufacturer: 6 adaptable connection sets provide inlet and outlet connections which are compatible with varying pipe dimensions and connection options. Variable pump feet ensure that the pump can take over the exact position of the old pump. Here you will find the product video. Field of application Swimming pool water circulation through a filter system. The pump can be installed max. 3 m above or below water level. Design Monoblock-type pump with integrated strainer tank. The bellow-type mechanical seal is mounted on a plastic shaft protector sleeve. Motor/pump shaft has no contact with the pool water providing complete electrical separation.   Pool equipment: Circulation pump Pool size in m³: 90 - 120 Filter size in mm: 750 - 800 Flow rate Q in m³/h: 24 Total head H in m WS: 8 Motor performance in kW (P2): 1.00 Strainer capacity in l: approx. 3 Pool type: Outdoor pool, Indoor pool Installation: Above ground pool, Built-in pool Class: PREMIUM Pump casing: PP GF 30 Diffuser: PP TV 40 / PP GF 30 Impeller: PA 66 GF 30 + PC / PP GF 30 Strainer basket: PP Mechanical seal: carbon / ceramic / NBR Screws: stainless steel Intermediate housing: PP GF 30 Gland housing: PP TV 40 Lid: PC, transparent / PP GF 30   Special motors on request. The above mentioned pumps can be used for pool water with a salt concentration of up to 0.5%, i. e. 5 g/l. For higher salt concentrations please contact us. Also available in AK version

Self-priming filtration circulation pump BADU EasyFit 29, alternating current version, for pool sizes of approximately 120 - 150 m³. 1~230 V H max. = 16,0 m Q max. = 34,0 m³/h Power input P1 (kW): 1,70 Power output P2 (kW): 1,30 Rated current = 7,40 A Rotational speed= 2840 U/min Inlet/outlet connection(d): 63/63 (6 alternative optional connection variants available) Weight= 18,2 kg With the BADU EasyFit the often time-consuming task of installing a new circulation pump into an existing filter unit is a thing of the past. The BADU EasyFit fits almost every unit, regardless of the manufacturer: 6 adaptable connection sets provide inlet and outlet connections which are compatible with varying pipe dimensions and connection options. Variable pump feet ensure that the pump can take over the exact position of the old pump. Here you will find the product video. Field of application Swimming pool water circulation through a filter system. The pump can be installed max. 3 m above or below water level. Design Monoblock-type pump with integrated strainer tank. The bellow-type mechanical seal is mounted on a plastic shaft protector sleeve. Motor/pump shaft has no contact with the pool water providing complete electrical separation.   Pool equipment: Circulation pump Pool size in m³: 120 - 150 Filter size in mm: 800 - 920 Flow rate Q in m³/h: 29 Total head H in m WS: 8 Motor performance in kW (P2): 1.30 Strainer capacity in l: approx. 3 Pool type: Outdoor pool, Indoor pool Installation: Built-in pool, Above ground pool Class: PREMIUM Pump casing: PP GF 30 Diffuser: PP TV 40 / PP GF 30 Impeller: PA 66 GF 30 + PC / PP GF 30 Strainer basket: PP Mechanical seal: carbon / ceramic / NBR Screws: stainless steel Intermediate housing: PP GF 30 Gland housing: PP TV 40 Lid: PC, transparent / PP GF 30   Special motors on request. The above mentioned pumps can be used for pool water with a salt concentration of up to 0.5%, i. e. 5 g/l. For higher salt concentrations please contact us. Also available in AK version

Self-priming filtration circulation pump BADU EasyFit 29, three-phase version for pool sizes of approximately 120 - 150 m³. 3~ Y/Δ 400/230 V H max. = 16,0 m Q max. = 34,0 m³/h Power input P1 (kW): 1,65 Power output P2 (kW): 1,30 Rated current = 3,00 / 5,20 A Rotational speed = 2840 U/min Inlet/outlet connection(d): 63/63 (6 alternative optional connection variants available) Weight= 16,2 kg With the BADU EasyFit the often time-consuming task of installing a new circulation pump into an existing filter unit is a thing of the past. The BADU EasyFit fits almost every unit, regardless of the manufacturer: 6 adaptable connection sets provide inlet and outlet connections which are compatible with varying pipe dimensions and connection options. Variable pump feet ensure that the pump can take over the exact position of the old pump. Here you will find the product video. Field of application Swimming pool water circulation through a filter system. The pump can be installed max. 3 m above or below water level. Design Monoblock-type pump with integrated strainer tank. The bellow-type mechanical seal is mounted on a plastic shaft protector sleeve. Motor/pump shaft has no contact with the pool water providing complete electrical separation.   Pool equipment: Circulation pump Pool size in m³: 120 - 150 Filter size in mm: 800 - 920 Flow rate Q in m³/h: 29 Total head H in m WS: 8 Motor performance in kW (P2): 1.30 Strainer capacity in l: approx. 3 Pool type: Outdoor pool, Indoor pool Installation: Built-in pool, Above ground pool Class: PREMIUM Pump casing: PP GF 30 Diffuser: PP TV 40 / PP GF 30 Impeller: PA 66 GF 30 + PC / PP GF 30 Strainer basket: PP Mechanical seal: carbon / ceramic / NBR Screws: stainless steel Intermediate housing: PP GF 30 Gland housing: PP TV 40 Lid: PC, transparent / PP GF 30   Special motors on request. The above mentioned pumps can be used for pool water with a salt concentration of up to 0.5%, i. e. 5 g/l. For higher salt concentrations please contact us. Also available in AK version  

Self-priming filtration circulation pump BADU EasyFit 36, alternating current version for pool sizes of approximately 150 - 180 m³. 1~230 V H max. = ca. 19,0 m Q max. = 41,0 m³/h Power input P1 (kW): 2,20 Power output P2 (kW): 1,80 Rated current = 10,0 A Rotational speed = 2840 U/min Inlet/outlet connection(d): 63/63 (6 alternative optional connection variants available) Weight= 21,9 kg With the BADU EasyFit the often time-consuming task of installing a new circulation pump into an existing filter unit is a thing of the past. The BADU EasyFit fits almost every unit, regardless of the manufacturer: 6 adaptable connection sets provide inlet and outlet connections which are compatible with varying pipe dimensions and connection options. Variable pump feet ensure that the pump can take over the exact position of the old pump. Here you will find the product video. Field of application Swimming pool water circulation through a filter system. The pump can be installed max. 3 m above or below water level. Design Monoblock-type pump with integrated strainer tank. The bellow-type mechanical seal is mounted on a plastic shaft protector sleeve. Motor/pump shaft has no contact with the pool water providing complete electrical separation.   Pool equipment: Circulation pump Pool size in m³: 150 - 180 Filter size in mm: 920 - 1100 Flow rate Q in m³/h: 36 Total head H in m WS: 8 Motor performance in kW (P2): 1.80 Strainer capacity in l: approx. 3 Pool type: Indoor pool, Outdoor pool Installation: Above ground pool, Built-in pool Class: PREMIUM Pump casing: PP GF 30 Diffuser: PP TV 40 / PP GF 30 Impeller: PA 66 GF 30 + PC / PP GF 30 Strainer basket: PP Mechanical seal: carbon / ceramic / NBR Screws: stainless steel Intermediate housing: PP GF 30 Gland housing: PP TV 40 Lid: PC, transparent / PP GF 30   Special motors on request. The above mentioned pumps can be used for pool water with a salt concentration of up to 0.5%, i. e. 5 g/l. For higher salt concentrations please contact us. Also available in AK version

Self-priming filtration circulation pump BADU EasyFit 36, three-phase version for pool sizes of approximately 150 - 180 m³. 3~ Y/Δ 400/230 V H max. = ca. 19,0 m Q max. = 41,0 m³/h Power input P1 (kW): 2,20 Power output P2 (kW): 1,80 Rated current = 3,70 / 6,40 A Rotational speed = 2840 U/min Inlet/outlet connection(d): 63/63 (6 alternative optional connection variants available) Weight= 19,1 kg With the BADU EasyFit the often time-consuming task of installing a new circulation pump into an existing filter unit is a thing of the past. The BADU EasyFit fits almost every unit, regardless of the manufacturer: 6 adaptable connection sets provide inlet and outlet connections which are compatible with varying pipe dimensions and connection options. Variable pump feet ensure that the pump can take over the exact position of the old pump. Here you will find the product video. Field of application Swimming pool water circulation through a filter system. The pump can be installed max. 3 m above or below water level. Design Monoblock-type pump with integrated strainer tank. The bellow-type mechanical seal is mounted on a plastic shaft protector sleeve. Motor/pump shaft has no contact with the pool water providing complete electrical separation.   Pool equipment: Circulation pump Pool size in m³: 150 - 180 Filter size in mm: 920 - 1100 Flow rate Q in m³/h: 36 Total head H in m WS: 8 Motor performance in kW (P2): 1.80 Strainer capacity in l: approx. 3 Pool type: Indoor pool, Outdoor pool Installation: Above ground pool, Built-in pool Class: PREMIUM Pump casing: PP GF 30 Diffuser: PP TV 40 / PP GF 30 Impeller: PA 66 GF 30 + PC / PP GF 30 Strainer basket: PP Mechanical seal: carbon / ceramic / NBR Screws: stainless steel Intermediate housing: PP GF 30 Gland housing: PP TV 40 Lid: PC, transparent / PP GF 30   Special motors on request. The above mentioned pumps can be used for pool water with a salt concentration of up to 0.5%, i. e. 5 g/l. For higher salt concentrations please contact us. Also available in AK version  

Self-priming filtration circulation pump BADU EasyFit 45, alternating current version for pool sizes of approximately 180 - 210 m³. 1~230 V H max. = ca. 19,0 m Q max. = ca. 51,0 m³/h Power input P1 (kW): 2,80 Power output P2 (kW): 2,20 Rated current = 12,2 A Rotational speed = 2840 U/min Inlet/outlet connection(d): 63/63 (6 alternative optional connection variants available) Weight= 25,2 kg With the BADU EasyFit the often time-consuming task of installing a new circulation pump into an existing filter unit is a thing of the past. The BADU EasyFit fits almost every unit, regardless of the manufacturer: 6 adaptable connection sets provide inlet and outlet connections which are compatible with varying pipe dimensions and connection options. Variable pump feet ensure that the pump can take over the exact position of the old pump. Here you will find the product video. Field of application Swimming pool water circulation through a filter system. The pump can be installed max. 3 m above or below water level. Design Monoblock-type pump with integrated strainer tank. The bellow-type mechanical seal is mounted on a plastic shaft protector sleeve. Motor/pump shaft has no contact with the pool water providing complete electrical separation.   Pool equipment: Circulation pump Pool size in m³: 180 - 210 Filter size in mm: larger than 1100 Flow rate Q in m³/h: 45 Total head H in m WS: 8 Motor performance in kW (P2): 2.20 Strainer capacity in l: approx. 3 Pool type: Indoor pool, Outdoor pool Installation: Above ground pool, Built-in pool Class: PREMIUM Pump casing: PP GF 30 Diffuser: PP TV 40 / PP GF 30 Impeller: PA 66 GF 30 + PC / PP GF 30 Strainer basket: PP Mechanical seal: carbon / ceramic / NBR Screws: stainless steel Intermediate housing: PP GF 30 Gland housing: PP TV 40 Lid: PC, transparent / PP GF 30   Special motors on request. The above mentioned pumps can be used for pool water with a salt concentration of up to 0.5%, i. e. 5 g/l. For higher salt concentrations please contact us. Also available in AK version  

Self-priming filtration circulation pump BADU EasyFit 45, three-phase version for pool sizes of approximately 180 - 210 m³. 3~ Y/Δ 400/230 V H max. = ca. 19,0 m Q max. = ca. 51,0 m³/h Power input P1 (kW): 2,62 Power output P2 (kW): 2,20 Rated current = 4,40 / 7,70 A Rotational speed = 2840 U/min Inlet/outlet connection(d): 63/63 (6 alternative optional connection variants available) Weight= 22,4 kg With the BADU EasyFit the often time-consuming task of installing a new circulation pump into an existing filter unit is a thing of the past. The BADU EasyFit fits almost every unit, regardless of the manufacturer: 6 adaptable connection sets provide inlet and outlet connections which are compatible with varying pipe dimensions and connection options. Variable pump feet ensure that the pump can take over the exact position of the old pump. Here you will find the product video. Field of application Swimming pool water circulation through a filter system. The pump can be installed max. 3 m above or below water level. Design Monoblock-type pump with integrated strainer tank. The bellow-type mechanical seal is mounted on a plastic shaft protector sleeve. Motor/pump shaft has no contact with the pool water providing complete electrical separation.   Pool equipment: Circulation pump Pool size in m³: 180 - 210 Filter size in mm: larger than 1100 Flow rate Q in m³/h: 45 Total head H in m WS: 8 Motor performance in kW (P2): 2.20 Strainer capacity in l: approx. 3 Pool type: Indoor pool, Outdoor pool Installation: Above ground pool, Built-in pool Class: PREMIUM Pump casing: PP GF 30 Diffuser: PP TV 40 / PP GF 30 Impeller: PA 66 GF 30 + PC / PP GF 30 Strainer basket: PP Mechanical seal: carbon / ceramic / NBR Screws: stainless steel Intermediate housing: PP GF 30 Gland housing: PP TV 40 Lid: PC, transparent / PP GF 30   Special motors on request. The above mentioned pumps can be used for pool water with a salt concentration of up to 0.5%, i. e. 5 g/l. For higher salt concentrations please contact us. Also available in AK version

Self-priming filtration circulation pump BADU EasyFit 9, alternating current version for pool sizes of approximately 30-60 m³. 1~ 230 V H max. = 14,0 m Q max. = 12,9 m³/h Power input P1 (kW): 0,58 Power output P2 (kW): 0,30 Rated current = 1,00 / 1,75 A Rotational speed = 2840 U/min Inlet/outlet connection(d): 50/50 (6 alternative optional connection variants available)   With the BADU EasyFit the often time-consuming task of installing a new circulation pump into an existing filter unit is a thing of the past. The BADU EasyFit fits almost every unit, regardless of the manufacturer: 6 adaptable connection sets provide inlet and outlet connections which are compatible with varying pipe dimensions and connection options. Variable pump feet ensure that the pump can take over the exact position of the old pump. Here you will find the product video. Field of application Swimming pool water circulation through a filter system. The pump can be installed max. 3 m above or below water level. Design Monoblock-type pump with integrated strainer tank. The bellow-type mechanical seal is mounted on a plastic shaft protector sleeve. Motor/pump shaft has no contact with the pool water providing complete electrical separation.   Pool equipment: Circulation pump Pool size in m³: 30 - 60 Filter size in mm: 450 - 500 Flow rate Q in m³/h: 9 Total head H in m WS: 8 Motor performance in kW (P2): 0.30 Strainer capacity in l: approx. 3 Pool type: Indoor pool, Outdoor pool Installation: Built-in pool, Above ground pool Class: PREMIUM Pump casing: PP GF 30 Diffuser: PP TV 40 / PP GF 30 Impeller: PA 66 GF 30 + PC / PP GF 30 Strainer basket: PP Mechanical seal: carbon / ceramic / NBR Screws: stainless steel Intermediate housing: PP GF 30 Gland housing: PP TV 40 Glue socket: ABS Lid: PC, transparent / PP GF 30   Special motors on request. The above mentioned pumps can be used for pool water with a salt concentration of up to 0.5%, i. e. 5 g/l. For higher salt concentrations please contact us. Also available in AK version

Self-priming filtration circulation pump BADU EasyFit 9, three-phase current version for pool sizes of approximately 30-60 m³. 3~ Y/Δ 400/230 V H max. = 14,0 m Q max. = 12,9 m³/h Power input P1 (kW): 0,58 Power output P2 (kW): 0,30 Rated current = 1,00 / 1,75 A Rotational speed = 2840 U/min Inlet/outlet connection(d): 50/50 (6 alternative optional connection variants available)   With the BADU EasyFit the often time-consuming task of installing a new circulation pump into an existing filter unit is a thing of the past. The BADU EasyFit fits almost every unit, regardless of the manufacturer: 6 adaptable connection sets provide inlet and outlet connections which are compatible with varying pipe dimensions and connection options. Variable pump feet ensure that the pump can take over the exact position of the old pump. Here you will find the product video. Field of application Swimming pool water circulation through a filter system. The pump can be installed max. 3 m above or below water level. Design Monoblock-type pump with integrated strainer tank. The bellow-type mechanical seal is mounted on a plastic shaft protector sleeve. Motor/pump shaft has no contact with the pool water providing complete electrical separation.   Pool equipment: Circulation pump Pool size in m³: 30 - 60 Filter size in mm: 450 - 500 Flow rate Q in m³/h: 9 Total head H in m WS: 8 Motor performance in kW (P2): 0.30 Strainer capacity in l: approx. 3 Pool type: Indoor pool, Outdoor pool Installation: Built-in pool, Above ground pool Class: PREMIUM Pump casing: PP GF 30 Diffuser: PP TV 40 / PP GF 30 Impeller: PA 66 GF 30 + PC / PP GF 30 Strainer basket: PP Mechanical seal: carbon / ceramic / NBR Screws: stainless steel Intermediate housing: PP GF 30 Gland housing: PP TV 40 Glue socket: ABS Lid: PC, transparent / PP GF 30   Special motors on request. The above mentioned pumps can be used for pool water with a salt concentration of up to 0.5%, i. e. 5 g/l. For higher salt concentrations please contact us. Also available in AK version  

BADU EasyFit Anschluss-Set 1: passend für Anschlüsse von Pentair® „Ultra-Flow®“ Pumpen und andere Pumpenmarken. Mit der BADU EasyFit gehören die oft aufwendigen Arbeiten beim Einbau einer neuen Umwälzpumpe in eine bestehende Filteranlage der Vergangenheit an. Die selbstansaugende Schwimmbadpumpe passt mit 6 verschiedenen Anschluss-Sets und flexiblen Pumpenfüßen - herstellerunabhängig - in fast jede Filteranlage.   TECHNISCHE DATEN Herstellerseite

BADU EasyFit Anschluss-Set 2: passend für Anschlüsse von Pentair® „WhisperFlo®“ Pumpen und andere Pumpenmarken. Mit der BADU EasyFit gehören die oft aufwendigen Arbeiten beim Einbau einer neuen Umwälzpumpe in eine bestehende Filteranlage der Vergangenheit an. Die selbstansaugende Schwimmbadpumpe passt mit 6 verschiedenen Anschluss-Sets und flexiblen Pumpenfüßen - herstellerunabhängig - in fast jede Filteranlage.   TECHNISCHE DATEN Herstellerseite

BADU EasyFit Anschluss-Set 3: passend für Anschlüsse von Hayward® „Super Pump®“ Pumpen und andere Pumpenmarken. Mit der BADU EasyFit gehören die oft aufwendigen Arbeiten beim Einbau einer neuen Umwälzpumpe in eine bestehende Filteranlage der Vergangenheit an. Die selbstansaugende Schwimmbadpumpe passt mit 6 verschiedenen Anschluss-Sets und flexiblen Pumpenfüßen - herstellerunabhängig - in fast jede Filteranlage.   TECHNISCHE DATEN Herstellerseite

BADU EasyFit Anschluss-Set 4: passend für Anschlüsse von Sta-Rite® „5P2R“ Pumpen und andere Pumpenmarken. Mit der BADU EasyFit gehören die oft aufwendigen Arbeiten beim Einbau einer neuen Umwälzpumpe in eine bestehende Filteranlage der Vergangenheit an. Die selbstansaugende Schwimmbadpumpe passt mit 6 verschiedenen Anschluss-Sets und flexiblen Pumpenfüßen - herstellerunabhängig - in fast jede Filteranlage.   TECHNISCHE DATEN Herstellerseite

BADU EasyFit Anschluss-Set 5: passend für Anschlüsse von Astral “Super Sprint”, Astral “Victoria Plus” and Wilo “Filtec FBS” Pumpen und andere Pumpenmarken. Mit der BADU EasyFit gehören die oft aufwendigen Arbeiten beim Einbau einer neuen Umwälzpumpe in eine bestehende Filteranlage der Vergangenheit an. Die selbstansaugende Schwimmbadpumpe passt mit 6 verschiedenen Anschluss-Sets und flexiblen Pumpenfüßen - herstellerunabhängig - in fast jede Filteranlage.   TECHNISCHE DATEN Herstellerseite

BADU EasyFit Anschluss-Set 6: passend für Anschlüsse von Sta-Rite® “5MPR (Dyna-Glas™)” Pumpen und andere Pumpenmarken. Mit der BADU EasyFit gehören die oft aufwendigen Arbeiten beim Einbau einer neuen Umwälzpumpe in eine bestehende Filteranlage der Vergangenheit an. Die selbstansaugende Schwimmbadpumpe passt mit 6 verschiedenen Anschluss-Sets und flexiblen Pumpenfüßen - herstellerunabhängig - in fast jede Filteranlage.   TECHNISCHE DATEN Herstellerseite