BADU Delta pool circulation pumps
The BADU Delta swimming pool pump BADU Delta 9, BADU Delta 13, BADU Delta 17, BADU Delta 22 and BADU Delta 28 has a maintenance-free motor with high performance ball bearings and a stainless steel motor shaft. It is especially quiet and efficient due to newly configured hydraulics. LED lighting in the transparent lid aids sight inspections. Inset drain plugs avoid risk of breakage and highly efficient technology leads to higher flow rates with lower energy consumption.
Use of the pumps for pools and their security zone is only permitted, if they are constructed according to DIN/VDE 0100 part 702. Please talk to your qualified electrician!
The electrical connection should generally be installed and carried out by a qualified electrician.
Please observe the manufacturers' recommendation that any work on the pumps should only be executed by experienced personnel with the following qualification:
– for mechanical work, for example change of ball-bearing or of mechanical seal: qualified mechanic.
– for work at the electrical system: electrician.
Source of product picture in high resolution: SPECK Pumpen Verkaufsgesellschaft GmbH
Self-priming filtration circulation pump BADU Delta 13, 230 V, alternating current version, higher flow rates with lower energy consumption 1~ 230 Volt Hmax: approx. 13,5 m Qmax: approx. 21,0 m³/h techQ: 13 m³/h techH: 8 m WS Power output: 0.45 kW Inlet / outlet connection(d): 63/63 outside, 50/50 inside Pool equipment: Circulation pump Flow rate Q in m³/h: 13 Total head H in m WS: 8 Motor performance in kW (P2): 0.45 Strainer capacity in l: ca. 4 Strainer basket mesh size in mm: ca. 2,2 x 2,2 Pool type: Indoor pool Installation: Built-in pool Class: PREMIUM Pump casing: PP GF 30 Impeller: PPE GF 30 Strainer basket: PP Mechanical seal: carbon / ceramic / NBR Screws: stainless steel Intermediate housing: PP GF 30 Lid: PC, transparent / PA 66 GF 30 The BADU Delta swimming pool pump has a maintenance-free motor with high performance ball bearings and a stainless steel motor shaft. It is especially quiet and efficient due to newly configured hydraulics. LED lighting in the transparent lid aids sight inspections. Inset drain plugs avoid risk of breakage and highly efficient technology leads to higher flow rates with lower energy consumption. Field of application Swimming pool circulation through a filter system. The pump can be installed max. 3 m above or below the water level. Design Monoblock-type pump with integrated strainer tank. Motor/pump shaft has no contact with the pool water, providing complete electrical separation. Special motors on request. The above mentioned pumps can be used for pool water with a salt concentration of up to 0.5%, i. e. 5 g/l. For higher salt concentrations please contact us. Also available in AK version
Self-priming filtration circulation pump BADU Delta 13, 400 V, three-phase current version, higher flow rates with lower energy consumption 3~Y/Δ 400/230 Volt Hmax: approx. 13,5 m Qmax: approx. 21,0 m³/h techQ: 13 m³/h techH: 8 m WS Power output: 0.45 kW Inlet / outlet connection(d): 63/63 outside, 50/50 inside Pool equipment: Circulation pump Flow rate Q in m³/h: 13 Total head H in m WS: 8 Motor performance in kW (P2): 0.45 Strainer capacity in l: ca. 4 Strainer basket mesh size in mm: ca. 2,2 x 2,2 Pool type: Indoor pool Installation: Built-in pool Class: PREMIUM Pump casing: PP GF 30 Impeller: PPE GF 30 Strainer basket: PP Mechanical seal: carbon / ceramic / NBR Screws: stainless steel Intermediate housing: PP GF 30 Lid: PC, transparent / PA 66 GF 30 The BADU Delta swimming pool pump has a maintenance-free motor with high performance ball bearings and a stainless steel motor shaft. It is especially quiet and efficient due to newly configured hydraulics. LED lighting in the transparent lid aids sight inspections. Inset drain plugs avoid risk of breakage and highly efficient technology leads to higher flow rates with lower energy consumption. Field of application Swimming pool circulation through a filter system. The pump can be installed max. 3 m above or below the water level. Design Monoblock-type pump with integrated strainer tank. Motor/pump shaft has no contact with the pool water, providing complete electrical separation. Special motors on request. The above mentioned pumps can be used for pool water with a salt concentration of up to 0.5%, i. e. 5 g/l. For higher salt concentrations please contact us. Also available in AK version
Self-priming filtration circulation pump BADU Delta 17, 230 V, alternating current version, higher flow rates with lower energy consumption 1~ 230 Volt Hmax: approx. 14,2 m Qmax: approx. 25,8 m³/h techQ: 17 m³/h techH: 8 m WS Power output: 0.55 kW Inlet / outlet connection(d): 75/75 outside, 63/63 inside Pool equipment: Circulation pump Flow rate Q in m³/h: 17 Total head H in m WS: 8 Motor performance in kW (P2): 0.55 Strainer capacity in l: ca. 4 Strainer basket mesh size in mm: ca. 2,2 x 2,2 Pool type: Indoor pool Installation: Built-in pool Class: PREMIUM Pump casing: PP GF 30 Impeller: PPE GF 30 Strainer basket: PP Mechanical seal: carbon / ceramic / NBR Screws: stainless steel Intermediate housing: PP GF 30 Lid: PC, transparent / PA 66 GF 30 The BADU Delta swimming pool pump has a maintenance-free motor with high performance ball bearings and a stainless steel motor shaft. It is especially quiet and efficient due to newly configured hydraulics. LED lighting in the transparent lid aids sight inspections. Inset drain plugs avoid risk of breakage and highly efficient technology leads to higher flow rates with lower energy consumption. Field of application Swimming pool circulation through a filter system. The pump can be installed max. 3 m above or below the water level. Design Monoblock-type pump with integrated strainer tank. Motor/pump shaft has no contact with the pool water, providing complete electrical separation. Special motors on request. The above mentioned pumps can be used for pool water with a salt concentration of up to 0.5%, i. e. 5 g/l. For higher salt concentrations please contact us. Also available in AK version
Self-priming filtration circulation pump BADU Delta 17, 400 V, three-phase current version, higher flow rates with lower energy consumption 3~Y/Δ 400/230 Volt Hmax: approx. 14,2 m Qmax: approx. 25,8 m³/h techQ: 17 m³/h techH: 8 m WS Power output: 0.55 kW Inlet / outlet connection(d): 75/75 outside, 63/63 inside Pool equipment: Circulation pump Flow rate Q in m³/h: 17 Total head H in m WS: 8 Motor performance in kW (P2): 0.55 Strainer capacity in l: ca. 4 Strainer basket mesh size in mm: ca. 2,2 x 2,2 Pool type: Indoor pool Installation: Built-in pool Class: PREMIUM Pump casing: PP GF 30 Impeller: PPE GF 30 Strainer basket: PP Mechanical seal: carbon / ceramic / NBR Screws: stainless steel Intermediate housing: PP GF 30 Lid: PC, transparent / PA 66 GF 30 The BADU Delta swimming pool pump has a maintenance-free motor with high performance ball bearings and a stainless steel motor shaft. It is especially quiet and efficient due to newly configured hydraulics. LED lighting in the transparent lid aids sight inspections. Inset drain plugs avoid risk of breakage and highly efficient technology leads to higher flow rates with lower energy consumption. Field of application Swimming pool circulation through a filter system. The pump can be installed max. 3 m above or below the water level. Design Monoblock-type pump with integrated strainer tank. Motor/pump shaft has no contact with the pool water, providing complete electrical separation. Special motors on request. The above mentioned pumps can be used for pool water with a salt concentration of up to 0.5%, i. e. 5 g/l. For higher salt concentrations please contact us. Also available in AK version
Self-priming filtration circulation pump BADU Delta 22, 230 V, alternating current version, higher flow rates with lower energy consumption 1~ 230 Volt Hmax: approx. 15,0 m Qmax: approx. 30,0 m³/h techQ: 22 m³/h techH: 8 m WS Power output: 0.75 kW Inlet / outlet connection(d): 75/75 outside, 63/63 inside Pool equipment: Circulation pump Flow rate Q in m³/h: 22 Total head H in m WS: 8 Motor performance in kW (P2): 0.75 Strainer capacity in l: ca. 4 Strainer basket mesh size in mm: ca. 2,2 x 2,2 Pool type: Indoor pool Installation: Built-in pool Class: PREMIUM Pump casing: PP GF 30 Impeller: PPE GF 30 Strainer basket: PP Mechanical seal: carbon / ceramic / NBR Screws: stainless steel Intermediate housing: PP GF 30 Lid: PC, transparent / PA 66 GF 30 The BADU Delta swimming pool pump has a maintenance-free motor with high performance ball bearings and a stainless steel motor shaft. It is especially quiet and efficient due to newly configured hydraulics. LED lighting in the transparent lid aids sight inspections. Inset drain plugs avoid risk of breakage and highly efficient technology leads to higher flow rates with lower energy consumption. Field of application Swimming pool circulation through a filter system. The pump can be installed max. 3 m above or below the water level. Design Monoblock-type pump with integrated strainer tank. Motor/pump shaft has no contact with the pool water, providing complete electrical separation. Special motors on request. The above mentioned pumps can be used for pool water with a salt concentration of up to 0.5%, i. e. 5 g/l. For higher salt concentrations please contact us. Also available in AK version
Self-priming filtration circulation pump BADU Delta 22, 400 V, three-phase current version, higher flow rates with lower energy consumption 3~Y/Δ 400/230 Volt Hmax: approx. 15,0 m Qmax: approx. 30,0 m³/h techQ: 22 m³/h techH: 8 m WS Power output: 0.75 kW Inlet / outlet connection(d): 75/75 outside, 63/63 inside Pool equipment: Circulation pump Flow rate Q in m³/h: 22 Total head H in m WS: 8 Motor performance in kW (P2): 0.75 Strainer capacity in l: ca. 4 Strainer basket mesh size in mm: ca. 2,2 x 2,2 Pool type: Indoor pool Installation: Built-in pool Class: PREMIUM Pump casing: PP GF 30 Impeller: PPE GF 30 Strainer basket: PP Mechanical seal: carbon / ceramic / NBR Screws: stainless steel Intermediate housing: PP GF 30 Lid: PC, transparent / PA 66 GF 30 The BADU Delta swimming pool pump has a maintenance-free motor with high performance ball bearings and a stainless steel motor shaft. It is especially quiet and efficient due to newly configured hydraulics. LED lighting in the transparent lid aids sight inspections. Inset drain plugs avoid risk of breakage and highly efficient technology leads to higher flow rates with lower energy consumption. Field of application Swimming pool circulation through a filter system. The pump can be installed max. 3 m above or below the water level. Design Monoblock-type pump with integrated strainer tank. Motor/pump shaft has no contact with the pool water, providing complete electrical separation. Special motors on request. The above mentioned pumps can be used for pool water with a salt concentration of up to 0.5%, i. e. 5 g/l. For higher salt concentrations please contact us. Also available in AK version
Self-priming filtration circulation pump BADU Delta 28, 230 V, alternating current version, higher flow rates with lower energy consumption 1~ 230 Volt Hmax: approx. 16,0 m Qmax: approx. 37,5 m³/h techQ: 28 m³/h techH: 8 m WS Power output: 1.00 kW Inlet / outlet connection(d): 75/75 outside, 63/63 inside Pool equipment: Circulation pump Flow rate Q in m³/h: 28 Total head H in m WS: 8 Motor performance in kW (P2): 1.00 Strainer capacity in l: ca. 4 Strainer basket mesh size in mm: ca. 2,2 x 2,2 Pool type: Indoor pool Installation: Built-in pool Class: PREMIUM Pump casing: PP GF 30 Impeller: PPE GF 30 Strainer basket: PP Mechanical seal: carbon / ceramic / NBR Screws: stainless steel Intermediate housing: PP GF 30 Lid: PC, transparent / PA 66 GF 30 The BADU Delta swimming pool pump has a maintenance-free motor with high performance ball bearings and a stainless steel motor shaft. It is especially quiet and efficient due to newly configured hydraulics. LED lighting in the transparent lid aids sight inspections. Inset drain plugs avoid risk of breakage and highly efficient technology leads to higher flow rates with lower energy consumption. Field of application Swimming pool circulation through a filter system. The pump can be installed max. 3 m above or below the water level. Design Monoblock-type pump with integrated strainer tank. Motor/pump shaft has no contact with the pool water, providing complete electrical separation. Special motors on request. The above mentioned pumps can be used for pool water with a salt concentration of up to 0.5%, i. e. 5 g/l. For higher salt concentrations please contact us. Also available in AK version
Self-priming filtration circulation pump BADU Delta 28, 400 V, three-phase current version, higher flow rates with lower energy consumption 3~Y/Δ 400/230 Volt Hmax: approx. 16,0 m Qmax: approx. 37,5 m³/h techQ: 28 m³/h techH: 8 m WS Power output: 1.00 kW Inlet / outlet connection(d): 75/75 outside, 63/63 inside Pool equipment: Circulation pump Flow rate Q in m³/h: 28 Total head H in m WS: 8 Motor performance in kW (P2): 1.00 Strainer capacity in l: ca. 4 Strainer basket mesh size in mm: ca. 2,2 x 2,2 Pool type: Indoor pool Installation: Built-in pool Class: PREMIUM Pump casing: PP GF 30 Impeller: PPE GF 30 Strainer basket: PP Mechanical seal: carbon / ceramic / NBR Screws: stainless steel Intermediate housing: PP GF 30 Lid: PC, transparent / PA 66 GF 30 The BADU Delta swimming pool pump has a maintenance-free motor with high performance ball bearings and a stainless steel motor shaft. It is especially quiet and efficient due to newly configured hydraulics. LED lighting in the transparent lid aids sight inspections. Inset drain plugs avoid risk of breakage and highly efficient technology leads to higher flow rates with lower energy consumption. Field of application Swimming pool circulation through a filter system. The pump can be installed max. 3 m above or below the water level. Design Monoblock-type pump with integrated strainer tank. Motor/pump shaft has no contact with the pool water, providing complete electrical separation. Special motors on request. The above mentioned pumps can be used for pool water with a salt concentration of up to 0.5%, i. e. 5 g/l. For higher salt concentrations please contact us. Also available in AK version
Self-priming filtration circulation pump BADU Delta 9, 230 V, single-phase current version, higher flow rates with lower energy consumption 1~230 Volt Hmax: approx. 12,7 m Qmax: approx. 15,6 m³/h techQ: 9 m³/h techH: 8 m WS Power output: 0.30 kW Inlet / outlet connection(d): 63/63 outside, 50/50 inside Pool equipment: Circulation pump Flow rate Q in m³/h: 9 Total head H in m WS: 8 Motor performance in kW (P2): 0.30 Strainer capacity in l: ca. 4 Strainer basket mesh size in mm: ca. 2,2 x 2,2 Pool type: Indoor pool Installation: Built-in pool Class: PREMIUM Pump casing: PP GF 30 Impeller: PPE GF 30 Strainer basket: PP Mechanical seal: carbon / ceramic / NBR Screws: stainless steel Intermediate housing: PP GF 30 Lid: PC, transparent / PA 66 GF 30 The BADU Delta swimming pool pump has a maintenance-free motor with high performance ball bearings and a stainless steel motor shaft. It is especially quiet and efficient due to newly configured hydraulics. LED lighting in the transparent lid aids sight inspections. Inset drain plugs avoid risk of breakage and highly efficient technology leads to higher flow rates with lower energy consumption. Field of application Swimming pool circulation through a filter system. The pump can be installed max. 3 m above or below the water level. Design Monoblock-type pump with integrated strainer tank. Motor/pump shaft has no contact with the pool water, providing complete electrical separation. Special motors on request. The above mentioned pumps can be used for pool water with a salt concentration of up to 0.5%, i. e. 5 g/l. For higher salt concentrations please contact us. Also available in AK version
Self-priming filtration circulation pump BADU Delta 9, 400 V, three-phase current version, higher flow rates with lower energy consumption 3~Y/Δ 400/230 Volt Hmax: approx. 12,7 m Qmax: approx. 15,6 m³/h techQ: 9 m³/h techH: 8 m WS Power output: 0.30 kW Inlet / outlet connection(d): 63/63 outside, 50/50 inside Pool equipment: Circulation pump Flow rate Q in m³/h: 9 Total head H in m WS: 8 Motor performance in kW (P2): 0.30 Strainer capacity in l: ca. 4 Strainer basket mesh size in mm: ca. 2,2 x 2,2 Pool type: Indoor pool Installation: Built-in pool Class: PREMIUM Pump casing: PP GF 30 Impeller: PPE GF 30 Strainer basket: PP Mechanical seal: carbon / ceramic / NBR Screws: stainless steel Intermediate housing: PP GF 30 Lid: PC, transparent / PA 66 GF 30 The BADU Delta swimming pool pump has a maintenance-free motor with high performance ball bearings and a stainless steel motor shaft. It is especially quiet and efficient due to newly configured hydraulics. LED lighting in the transparent lid aids sight inspections. Inset drain plugs avoid risk of breakage and highly efficient technology leads to higher flow rates with lower energy consumption. Field of application Swimming pool circulation through a filter system. The pump can be installed max. 3 m above or below the water level. Design Monoblock-type pump with integrated strainer tank. Motor/pump shaft has no contact with the pool water, providing complete electrical separation. Special motors on request. The above mentioned pumps can be used for pool water with a salt concentration of up to 0.5%, i. e. 5 g/l. For higher salt concentrations please contact us. Also available in AK version