Self-priming circulation pump Trend 110 / AQUA Plus 11 for pool sizes of approximately 40-50 m³ 1~ 230 V Hmax: 13,4 m Qmax: 17,0 m³/h techQ: 11 m³/h techH: 8 m WS Pool size: 40 - 50 m³ Power output: 0.69 kW Inlet / outlet connection(d): Special union with glue socket d=50 or hose adapter for 1¼" and/or 1½" hose The introductory model for small to medium-size filter units offers an economical and reliable solution for above ground pools. Field of application Swimming pool water circulation through a filter system. The pump can be installed max. 2 m above or max. 3 m below water level. Design Monoblock-type pump with integrated strainer tank. The bellow-type mechanical seal is mounted on a plastic shaft protector sleeve. Motor/pump shaft has no contact with the pool water providing complete electrical separation. The above mentioned pumps can be used for pool water with a salt concentration of up to 0.5%, i. e. 5 g/l. For higher salt concentrations please contact us.   TECHNICAL DATA *PDF*

Self-priming circulation pump Trend 50 / AQUA Plus 4 for pool sizes of approximately 15-20 m³ 1~ 230 V Hmax: 9,9 m Qmax: 9,5 m³/h techQ: 4 m³/h techH: 8 m WS Pool size: 15 - 20 m³ Power output: 0.35 kW Inlet / outlet connection(d): Special union with glue socket d=50 or hose adapter for 1¼" and/or 1½" hose The introductory model for small to medium-size filter units offers an economical and reliable solution for above ground pools. Field of application Swimming pool water circulation through a filter system. The pump can be installed max. 2 m above or max. 3 m below water level. Design Monoblock-type pump with integrated strainer tank. The bellow-type mechanical seal is mounted on a plastic shaft protector sleeve. Motor/pump shaft has no contact with the pool water providing complete electrical separation. The above mentioned pumps can be used for pool water with a salt concentration of up to 0.5%, i. e. 5 g/l. For higher salt concentrations please contact us.   TECHNICAL DATA *PDF*

Self-priming circulation pump Trend 70 / AQUA Plus 6 for pool sizes of approximately 20-30 m³ 1~ 230 V Hmax: 10,9 m Qmax: 11,5 m³/h techQ: 6 m³/h techH: 8 m WS Pool size: 20 - 30 m³ Power output: 0.45 kW Inlet / outlet connection(d): Special union with glue socket d=50 or hose adapter for 1¼" and/or 1½" hose The introductory model for small to medium-size filter units offers an economical and reliable solution for above ground pools. Field of application Swimming pool water circulation through a filter system. The pump can be installed max. 2 m above or max. 3 m below water level. Design Monoblock-type pump with integrated strainer tank. The bellow-type mechanical seal is mounted on a plastic shaft protector sleeve. Motor/pump shaft has no contact with the pool water providing complete electrical separation. The above mentioned pumps can be used for pool water with a salt concentration of up to 0.5%, i. e. 5 g/l. For higher salt concentrations please contact us.   TECHNICAL DATA *PDF*

Self-priming circulation pump Trend 90 / AQUA Plus 8 for pool sizes of approximately 30-40 m³ 1~ 230 V Hmax: 12,0 m Qmax: 14,0 m³/h techQ: 8 m³/h techH: 8 m WS Pool size: 30 - 40 m³ Power output: 0.60 kW Inlet / outlet connection(d): Special union with glue socket d=50 or hose adapter for 1¼" and/or 1½" hose The introductory model for small to medium-size filter units offers an economical and reliable solution for above ground pools. Field of application Swimming pool water circulation through a filter system. The pump can be installed max. 2 m above or max. 3 m below water level. Design Monoblock-type pump with integrated strainer tank. The bellow-type mechanical seal is mounted on a plastic shaft protector sleeve. Motor/pump shaft has no contact with the pool water providing complete electrical separation. The above mentioned pumps can be used for pool water with a salt concentration of up to 0.5%, i. e. 5 g/l. For higher salt concentrations please contact us.   TECHNICAL DATA *PDF*

Connection set cpl., 1 1/4" / 1 1/2" and 50 mm, for Trend and Aqua Plus, Pos. 412.10 + 721, consisting of:2 x O-ring for pipe connections, 50 x 3 mm2 x Glue socket dia = 50 mm, black2 x Hose adapter 1 1/4" / 1 1/2" (= 32 / 38 mm)2 x Union nut for glue socket dia = 50 mm and hose adapter 1 1/4" / 1 1/2", black

Drain cap, G 3/8, yellow, with gasket, for Aqua Plus, Trend, Super Pump 12, Super Pump 14, Filterpump MP 8, MP 10, MP 12 and MP 14, Pos. 903

Gleitringdichtung komplett, 14mm, Kohle/Keramik/NBR, Pos. 433, für Aqua Technix Aqua Plus, Aqua Splash und Trend  (für Schwimmbeckenwasser bis zu einer Gesamtsalzkonzentration von 0,5% (entsprechend 5 g/l) konzipiert. Bei höheren Salzkonzentrationen kann es zu erhöhtem Verschleiß an den Dichtflächen kommen.) HINWEIS SPECK PUMPEN: Nach längerem Stillstand (z.B. nach dem Winter) prüfen Sie die Pumpe vor dem Einschalten auf Leichtgängigkeit. Drehen Sie dazu die Motorwelle mit einem Schraubendreher leicht durch. Sollte sich der Motor über die Monate festgesetzt haben, lösen Sie so die Blockade. Nur wenn Ihre Pumpe danach immer noch schwergängig bleibt oder ungewöhnliche Geräusche entwickelt, lassen Sie die Pumpe von einem geschulten Fachmann überprüfen.

Housing AQUA Plus, black, complete, black, consisting of: Housing, pos. 101, strainer basket, pos. 143, transparent lid, pos. 160.1, ring for lid black, pos.160.2, o-ring for lid, pos. 412.1, drain cap yellow, Pos. 582, for AQUA Plus 4, AQUA Plus 6, AQUA Plus 8, AQUA Plus 11, Trend 50, Trend 70, Trend 90, Trend 110

Impeller, PP, new optimized version, dia=100 mm, b=10.5 mm, for AQUA Plus 11, Trend 110, BADU Magic 11, BADU Magic II/11, Pos.230 Old item number: 2921.623.004

Impeller, dia=100 mm, b=4 mm, for Aqua Plus 4, Trend 50, Aqua Splash 4, BADU Magic 4, BADU Magic II/4, BADU Picco 5, BADU Picco II, Whitestar 3, Pos.230

Impeller, dia=100 mm, b=6 mm, new, optimized version, for Aqua Plus 6, Trend 70, Aqua Splash 6, BADU Magic II/6 and BADU Magic 6, Pos.230 Old item number: 2921.623.002

Impeller, dia=100 mm, b=8 mm, new, optimized version, for Aqua Plus 8 und Trend 90, Pos. 230 Previous item number: 2921.623.003

Wechselstrom-Motor mit Kabel und Stecker, 230 V, P2=0,45 kW, P1=0,69 kW, für Aqua Plus 11, Trend 110, Super Pump PREMIUM 12, BADU 45/6, BADU EasyFit 12, Belstar 10, Pos. 800, als Ersatz für den defekten Pumpenmotor.

Wechselstrom-Motor mit Kabel und Stecker, 230 V, P2=0,25 kW, P1=0,45 kW, für Aqua Plus 6, Super Pump PREMIUM 6, Trend 70, Pos. 800, als Ersatz für den defekten Pumpenmotor.

Single-phase motor with plug and cable, 230 V, P2 = 0.40 kW, P1 = 0,60 kW, for Aqua Plus 8, Trend 90 and Pro-Pump 9, Pos. 800, as a replacement for a broken pump motor

Repair set of o-rings for Aqua Plus, Trend, BADU Magic, BADU magic II, all models Consisting of: 1 x O-ring for lid, 105 x 5 mm 1 x O-ring for gland housing, 165 x 6 mm 2 x O-ring für pipe connections, 50 x 3 mm 6 x O-ring for screws, 6 x 2 mm, Viton 6 x Cylinder head screw, M 6 x 35, plastic

Ring for lid, ABS, black, for Aqua Plus 4, Aqua Plus 6, Aqua Plus 8, Aqua Plus 11, Trend 50, Trend 70, Trend 90, Trend 110, Aqua Splash, BADU Alpha 6, BADU Alpha 8, BADU Alpha 10, BADU Alpha 12, Pos. 160.2 - without transparent lid, which may be ordered separately -

Splash ring, 12.2 x 45 x 4 mm, for Aqua Plus, Trend, BADU Picco 5, BADU Picco II, BADU Magic and BADU Magic II, Pos.507 (illust. similar)

Strainer basket, PP, yellow, for Aqua Plus 4, Aqua Plus 6, Aqua Plus 8, Aqua Plus 11, Trend 50, Trend 70, Trend 90 , Trend 110, Pos. 143

Transparent lid, PC, for Aqua Plus 4, Aqua Plus 6, Aqua Plus 8, Aqua Plus 11, Trend 50, Trend 70, Trend 90, Trend 110, Pos. 160.1 - without ring for lid, which may be ordered separately -

Transparent lid, PC, withhose adapter 1 1/2" / 1 1/4" (dia = 32 / 38 mm), for Aqua Splash 4 and Aqua Splash 6, Pos. 160.1 - without ring for lid, which may be ordered separately -

Strainer basket, PP, yellow, for Aqua Splash 4 and Aqua Splash 6, Pos. 143

Connection set complete for Aqua Splash 4 and Aqua Splash 6, consisting of: 1 x O-Ring 50 x 3 mm 1 x Hose adapter G 1 1/2 x 32/38 mm, PP

Self-priming circulation pump Trend 110 / AQUA Plus 11 for pool sizes of approximately 40-50 m³ 1~ 230 V Hmax: 13,4 m Qmax: 17,0 m³/h techQ: 11 m³/h techH: 8 m WS Pool size: 40 - 50 m³ Power output: 0.69 kW Inlet / outlet connection(d): Special union with glue socket d=50 or hose adapter for 1¼" and/or 1½" hose The introductory model for small to medium-size filter units offers an economical and reliable solution for above ground pools. Field of application Swimming pool water circulation through a filter system. The pump can be installed max. 2 m above or max. 3 m below water level. Design Monoblock-type pump with integrated strainer tank. The bellow-type mechanical seal is mounted on a plastic shaft protector sleeve. Motor/pump shaft has no contact with the pool water providing complete electrical separation. The above mentioned pumps can be used for pool water with a salt concentration of up to 0.5%, i. e. 5 g/l. For higher salt concentrations please contact us.   TECHNICAL DATA *PDF*